This followed me home from Woodcraft last weekend
#21
Interesting!
Our DVR-XP came in a cardboard box. OK, so it was layers of box, but still. it was a cardboard box.

What is interesting is the crate appears identical with the crate our Grizzly G0766 came in.
I'm certain the dimensions are different, but the crate is 100% identical, down to the metal brackets on the corners and the "spacers" under the crate.

I would venture to say, these two lathes were crated by the same firm. NOT they were made by the same firm, but...
I'm going to guess that both factories are subbing their crates out to the same company.

I hope you enjoy your new lathe!
Making sawdust mostly, sometimes I get something else, but that's more accident then design.
Reply
#22
Nice, Congratulations!

I am hoping to clean up the lathe and make some turned sawdust very soon myself.

michael
Every day find time to appreciate life. It is far too short and 'things' happen. RIP Willem
Reply
#23
Thanks for the good suggestion MM!

I was trying to decide on a shelf spanning the legs that could hold a small storage cabinet for lathe accessories and leave space on either side for additional ballast...but thinking that ballast may not be needed.

Lathe will be near a wall as well.  That wall has some old kitchen upper cabinets that could also hold turning items.

Decisions, decisions...
Laugh
Wink 

n7bsn - Interesting about the crating....you never know! Thanks!

MichaelS - Thanks.  Hope to have the lathe in-place by dinner time.
"I don't have an answer to your question....but I can answer a question that you may be asking in the future"
Reply
#24
Steve

Ballast is always needed I feel.  I still would like to get some 2x12s and do it with my PM3520b and add about 300# more to it and then build a vacuum system between the ways underneath so all the shavings get sucked up.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#25
Hi Steve,

After you get the bed leveled front to back and side to side, put some of these babies under the feet (they're a perfect fit) and you'll be in smooth turning heaven.

https://www.amazon.com/gp/product/B005H1...UTF8&psc=1

I have my Galaxi close to and parallel to a wall.  I'm going to put a piece of the 2" blue foam board on the wall in the line of fire behind the lathe so if a bowl flies off the foam will absorb a lot the energy and reduce rebound.

Enjoy your new lathe and if you have any questions about it I'll be happy to help if I can.

Jim
Reply
#26
Thanks Arlin and Jim --useful suggestions that are appreciated.

She's all put together now and level front-to-back and side-to-side. Gonna fire 'er up after a late (and quick) dinner.
"I don't have an answer to your question....but I can answer a question that you may be asking in the future"
Reply
#27
Steve,
Congrats on the new Lathe looking forward to pictures and first impressions.
Tim
Reply
#28
NC Jim, et al:
Bowls NEVER fly off toward the back of the lathe. They ALWAYS fly off toward the turner. That is why a coat of chain mail is a necessity for all turners. And the bowls often will make 90 degree turns to find you if you are hiding behind a corner.

DAMHIKT

GM
The only tool I have is a lathe.  Everything else is an accessory.
Reply
#29
(03-11-2017, 02:45 PM)Arlin Eastman Wrote: Steve

Ballast is always needed I feel.  I still would like to get some 2x12s and do it with my PM3520b and add about 300# more to it and then build a vacuum system between the ways underneath so all the shavings get sucked up.

When there was a possibility of head injury, we never gave certain drugs which might mask it until cleared by CT.  Feel the same way about making a Weeble out of a lathe.  No way should anything close to circular ever shake it.  Tighten, shim, secure the parts and start low rpm.  Barring a flimsy sheet-metal stand, should never have to tolerate or mask shake.
Better to follow the leader than the pack. Less to step in.
Reply
#30
(03-11-2017, 12:42 PM)SteveK Wrote: Thanks for the good suggestion MM!

I was trying to decide on a shelf spanning the legs that could hold a small storage cabinet for lathe accessories and leave space on either side for additional ballast...but thinking that ballast may not be needed.

Lathe will be near a wall as well.  That wall has some old kitchen upper cabinets that could also hold turning items.

Decisions, decisions...
Laugh
Wink 

n7bsn - Interesting about the crating....you never know! Thanks!

MichaelS - Thanks.  Hope to have the lathe in-place by dinner time.

Here is my 1624 against 3 walls, on a shop made cabinet, turning tools above, and old kitchen cabinets to the left.

<img src="http://i373.photobucket.com/albums/oo177/stevansweeney/100_0661%202_zps7trxaheg.jpg" border="0" alt=" photo 100_0661 2_zps7trxaheg.jpg"/>

and

<img src="http://i373.photobucket.com/albums/oo177/stevansweeney/100_0670%202_zpsr8zpouod.jpg" border="0" alt=" photo 100_0670 2_zpsr8zpouod.jpg"/>
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.