03-17-2017, 09:17 AM
Are there any tips on making the sanding of the profiles on rail an stiles any faster between finishes? I have about a dozen doors to do and am not looking forward to it.
|
Sanding profile on rail and style
|
03-17-2017, 09:28 AM
Why are you wanting to sand them? I never have, I just stain clear and done.
Just finished the last 25 doors for our kitchen. Next time I will buy racks and a tent to do the finishing in so I can do it all at one time. Just don't have room for 60+ pieces at one time. 
03-17-2017, 10:36 AM
brush backed flap wheel
320 is the one I use for sanding sealer coats I never hit the finish coats Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
03-17-2017, 02:01 PM
And yes you have to spend a few $$$$$$ for the better made flap sanders. They would be the ones where 90% of the media does NOT fly off the wheel on the first revolution.
The entire unit The replacement medium x 28 pieces If you have much work to do, it's best to order both at once.
Worst thing they can do is cook ya and eat ya
 GW |
|
|
Users browsing this thread: 1 Guest(s)