Woodnet Forums › › Active › Tool Swap N' Sell v
FS: Many hand tools
Thread Modes
FS: Many hand tools
SteveF Offline
Member
Posts: 2,418
Threads: 0
Joined: Jun 2008
Location: Cape Neddick, ME
#11
04-15-2017, 05:47 PM
It's going to take a few posts to get them all in. The picture limits are troublesome.

Millers Falls No.2A eggbeater drill. Works well, quieter than average.

$30 plus shipping

[Image: 20170415_150437-L.jpg]
[Image: 20170415_150451-L.jpg]

Millers Falls No.2 eggbeater drill. As above, quieter than average.

$30 plus shipping

[Image: 20170415_150630-L.jpg]
[Image: 20170415_150640-L.jpg]

Millers Falls No.5A eggbeater drill. Very smooth and quiet.

$25 plus shipping

[Image: 20170415_150926-L.jpg]
[Image: 20170415_150938-L.jpg]

Goodell Pratt eggbeater drill. Again, very smooth and quiet.

$20 plus shipping

[Image: 20170415_151017-L.jpg]
[Image: 20170415_151027-L.jpg]

Yankee No.1530A eggbeater drill. Shifts nicely, no problems.

$25 plus shipping

[Image: 20170415_151145-L.jpg]
[Image: 20170415_151227-L.jpg]
Find
Reply
SteveF Offline
Member
Posts: 2,418
Threads: 0
Joined: Jun 2008
Location: Cape Neddick, ME
#12
04-15-2017, 06:06 PM (This post was last modified: 04-15-2017, 07:58 PM by SteveF.)
Peer fret saw. NOS, made in Germany.

$12 plus shipping

[Image: 20170415_151050-L.jpg]

Millers Falls No.1 cigar shaves. Pretty similar in condition. The top one has a patent date and a slightly longer blade.

$35 apiece plus shipping

[Image: 20170415_151314-L.jpg]
[Image: 20170415_151331-L.jpg]

P.S.&W. 10" drawknife. Nice one, sharp.

$35 plus shipping

[Image: 20170415_160731-L.jpg]
[Image: 20170415_160746-L.jpg]
[Image: 20170415_160757-L.jpg]

Stanley No.66 beader, The finish has been enhanced at some point. The blades are Lie Nielsen (I think).

$50 plus shipping

[Image: 20170415_151511-L.jpg]
[Image: 20170415_151523-L.jpg]
[Image: 20170415_151543-L.jpg]

Dewalt laminate trimmer set. Runs good. It has the fixed, tilting, and offset bases. The body is marked with the previous owner's name, he passed away a couple of months back.

$80 plus shipping

[Image: 20170415_161216-L.jpg]
Find
Reply
SteveF Offline
Member
Posts: 2,418
Threads: 0
Joined: Jun 2008
Location: Cape Neddick, ME
#13
04-15-2017, 06:19 PM
Stanley No.79 side rabbet plane. Good shape, one spot of pitting on fence.

$45 plus shipping

[Image: 20170415_151559-L.jpg]
[Image: 20170415_151610-L.jpg]
[Image: 20170415_151622-L.jpg]

Skew plane, group of 5. Several wooden planes for rabbeting or dadoing, largest is 1 3/4".

$60 for all plus shipping

[Image: 20170415_152348-L.jpg]
[Image: 20170415_152516-L.jpg]
[Image: 20170415_152643-L.jpg]

Starrett 12" hardened steel combo square set. There is some light pitting on the square head and a spot of missing plating on the rule.

$65 plus shipping

[Image: 20170415_160448-L.jpg]
[Image: 20170415_160518-L.jpg]
[Image: 20170415_160555-L.jpg]
Find
Reply
SteveF Offline
Member
Posts: 2,418
Threads: 0
Joined: Jun 2008
Location: Cape Neddick, ME
#14
04-15-2017, 06:40 PM
1/8" chisel. Marked Cook, but that may be an owner's name.

$12 plus shipping

[Image: 20170415_155929-L.jpg]
[Image: 20170415_155950-L.jpg]
[Image: 20170415_160003-L.jpg]

Stanley Sweetheart 1/4" Everlast chisel.

$28 plus shipping

[Image: 20170415_153011-L.jpg]
[Image: 20170415_153020-L.jpg]

Buck Bros 1/4" carving chisel.

$10 plus shipping

[Image: 20170415_152840-L.jpg]
[Image: 20170415_152849-L.jpg]
[Image: 20170415_152858-L.jpg]

Buck Brothers 3/4" bevel edge chisel. 

$18 plus shipping

[Image: 20170415_151649-L.jpg]
[Image: 20170415_151657-L.jpg]
Find
Reply
SteveF Offline
Member
Posts: 2,418
Threads: 0
Joined: Jun 2008
Location: Cape Neddick, ME
#15
04-15-2017, 06:57 PM
Buck Bros 1" cranked chisel.

$22 plus shipping

[Image: 20170415_152754-L.jpg]
[Image: 20170415_152805-L.jpg]

Charles Buck 1 1/4" chisel.

$15 plus shipping

[Image: 20170415_153035-L.jpg]
[Image: 20170415_153044-L.jpg]

P.S.&W. 2" chisel.

$25 plus shipping

[Image: 20170415_160054-L.jpg]
[Image: 20170415_160110-L.jpg]
[Image: 20170415_160123-L.jpg]

T.H.Witherby 1" gouge.

$15 plus shipping

[Image: 20170415_160246-L.jpg]
[Image: 20170415_160300-L.jpg]
Find
Reply
JJO Offline
Member
Posts: 390
Threads: 0
Joined: May 2004
#16
04-15-2017, 07:55 PM
Price on drawknife?    Thanks
Jerry
Find
Reply
SteveF Offline
Member
Posts: 2,418
Threads: 0
Joined: Jun 2008
Location: Cape Neddick, ME
#17
04-15-2017, 07:59 PM (This post was last modified: 04-16-2017, 10:01 AM by SteveF.)
I fixed the drawknife listing $35. Thanks.

Sold so far:

Starrett combo square set

P.S.&W. 2" chisel

Millers Falls No.1 spokeshave (top one)

Fret saw

P.S.&W 10" drawknife

Millers Falls No.2A eggbeater drill

Millers Falls No.1 cigar shave (bottom one)

Buck Bros 1/4" carving chisel

Stanley 66 beader

Millers Falls No.5A eggbeater

Set of 5 wooden skew planes
Find
Reply
ron kanter Offline
Member
Posts: 188
Threads: 0
Joined: Jul 2016
Location: Philadelphia, PA
#18
04-15-2017, 08:01 PM
I'll take the P.S.&W. 2" chisel
Send a PM with shipping cost to 19129
Thanks
Find
Reply
gedderdone Offline
Member
Posts: 192
Threads: 0
Joined: Feb 2005
#19
04-15-2017, 09:10 PM
I'll take the fret saw if still available.
Find
Reply
Dakotapix Offline
Member
Posts: 33
Threads: 0
Joined: Jul 2012
#20
04-16-2017, 07:03 AM
PM sent on Millers Falls 2a Eggbeater Drill.
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.