Water On The Floor After Washing A Load Of Clothes
#15
  Re: Water On The Floor After Washing A Load Of Clothes by crokett™ (Samsung washer, not ...)
The water is coming over the top of the drum but not from splashing. There's a sprayer mounted at the top of the washer. It sprays water down into the drum at the beginning of the rinse cycle, and it's not angled correctly. Some of the water is making it over the top of the drum. When this load is finished I will see about adjusting it.

Well after some checking, it appears the nozzle has broken loose. It doesn't seem to want to clip back in. I can't really get behind it to see any clips - the hose it's attached to isn't long enough. I just know it doesn't want to stay clipped in. The part is discontinued. I'm going to let it sit for a few days to dry off then try silicone and see how long it stays in place.
Reply
#16
  Re: Water On The Floor After Washing A Load Of Clothes by crokett™ (Samsung washer, not ...)
(05-09-2017, 09:24 PM)crokett™ Wrote: The water is coming over the top of the drum but not from splashing.  There's a sprayer mounted at the top of the washer.  It sprays water down into the drum at the beginning of the rinse cycle, and it's not angled correctly. Some of the water is making it over the top of the drum.  When this load is finished I will see about adjusting it.

Well after some checking, it appears the nozzle has broken loose.  It doesn't seem to want to clip back in.  I can't really get behind it to see any clips - the hose it's attached to isn't long enough. I just know it doesn't want to stay clipped in.   The part is discontinued.  I'm going to let it sit for a few days to dry off then try silicone and see how long it stays in place.

Did you try  Repairclinic.com?

https://www.repairclinic.com/Appliance-Parts
No animals were injured or killed in the production of this post.
Reply
#17
  Re: Water On The Floor After Washing A Load Of Clothes by crokett™ (Samsung washer, not ...)
yes. the part is discontinued. Samsung might have a compatible replacement part but replacing the nozzle will be a pain - limited access to the clamp that holds the hose on the nozzle. My other thought was if I can get pliers in there, loosen the clamp a bit and see if I can turn the nozzle to point down.
Reply
#18
  Re: Water On The Floor After Washing A Load Of Clothes by crokett™ (Samsung washer, not ...)
Another thing to watch for on Samsung machines is the fill level sensor tube that goes from the drum to a pressure sensor switch. That tube can come loose causing what looks like a leak.
VH07V  
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)