(05-12-2017, 08:04 PM)JGrout Wrote: I am not trying to ditz what John has done it worked for him; it is however unnecessary
John,
Thanks for bringing this product, along with its attributes to our attention. I think we've all (save one) struggled with TB (PVA glues) in the race to get the clamps tightened with square joints before the glue dries. Even with the extended version, it is somewhat of a crap shoot, depending on the extent of the glue-up. The product you referenced also acting as a lubricant to help draw the joints tight is a bonus.
I'll certainly give it a try on my next large glue-up.
Thanks again,
Doug