Posts: 1,189
Threads: 0
Joined: Jun 2003
Location: Wakefield, MA
I just watched a PBS NOVA program about ancient Chinese chariots. Two guys replicated one. To make the wheels they ripped a long piece of lumber and steam-bent it. What I was wondering, does anybody know what kind table saw that was that one of the guys ripped the wood on? The blade was huge enough to rip (resaw) a piece that was maybe 5 or 6 inches thick. The rip fence looked like if was about a foot tall, and the table was very long. It looked like a piece very old iron.
Posts: 13,388
Threads: 4
Joined: Jun 2007
Location: New Jersey
Link to video, look at about 15:52; hard to tell what kind of saw he is using, but he's in England . . . .
http://www.pbs.org/video/3000902498/
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
European saw, old for sure. Maybe something like a 12" blade? The wood looked to be about 3-4 inches tall and the blade extended above it about an inch or so. That would jive with a 12" blade.
Posts: 833
Threads: 0
Joined: Nov 2006
I cannot see the video but could it be an European style cirkular rip saw?
Something like this:
https://www.youtube.com/watch?v=OOCEjb7FyKs
This is an unusually big one by the way:
https://www.youtube.com/watch?v=U9HMLx6Iiv8
Theese big ones are considered very unsafe and are hardly ever used anymore.
My rip saw has a 24" blade which gives 20 cm (8") depth of cut. It was manufactured in Chemnitz, Germany in 1885. It is retrofitted with a 10hp three phase motor.
Now it just need a new switch box to make it ready to run after the total rebuild and safety upgrade I gave it last year.
Part timer living on the western coast of Finland. Not a native speaker of English
