08-09-2017, 07:48 PM
(This post was last modified: 08-12-2017, 11:39 AM by Dave Diaman.)
More house cleaning going on. My chisel drawer is a little out of control so I need to thin the herd a little. I'm also going to be posting a set of Lie Nielsen chisels but I will wait until I have photos before I post those. Figure all shipping will be $7 for a small flat rate box or actual whichever is cheaper. The only thing that will not fit into a flat rate box will probably be the mortice chisels and I will have to get a shipping quote for those.
First up are two Ashley Iles chisels. They are 3/8" and 1/2". $15 ea. SOLD
Next up is two Marples Mortice chisels 5/16" and 3/8" $25 for both.
These chisels are a little out of the ordinary. I got these from an orthopedic surgeon. They are bone chisels. I don't know what kind of steel they are but it is absolutely the toughest steel I have ever used. You absolutely have to sharpen these with diamond media. I watched someone drive one of these things an inch deep through a board into concrete and it didn't phase the chisel. It takes a little while to get one sharp but once it is sharp..... There are two straight chisels and one curved roughly 1/2" and 3/4" wide. These are also double beveled chisels. $30 for all three. Sold
Henry Taylor #3 / 3/4 carving gouge. $15
Lee Valley chisel tip awl $12
Veritas micro adjust marking gauge $20 SOLD
That's all for now. More to come soon.
First up are two Ashley Iles chisels. They are 3/8" and 1/2". $15 ea. SOLD
Next up is two Marples Mortice chisels 5/16" and 3/8" $25 for both.
These chisels are a little out of the ordinary. I got these from an orthopedic surgeon. They are bone chisels. I don't know what kind of steel they are but it is absolutely the toughest steel I have ever used. You absolutely have to sharpen these with diamond media. I watched someone drive one of these things an inch deep through a board into concrete and it didn't phase the chisel. It takes a little while to get one sharp but once it is sharp..... There are two straight chisels and one curved roughly 1/2" and 3/4" wide. These are also double beveled chisels. $30 for all three. Sold
Henry Taylor #3 / 3/4 carving gouge. $15
Lee Valley chisel tip awl $12
Veritas micro adjust marking gauge $20 SOLD
That's all for now. More to come soon.