Posts: 15,331
Threads: 0
Joined: Jan 2005
I'm going to but store-bought cabinets (7') in a one car garage that's insulated but not heated/cooled. Two 3-0 windows, one 3-0 door, and one garage door.
I'm thinking of putting a store-bought butcher block countertop on it. Would that be a problem due to the humidity swings from summer to winter?
Wonderin'.
This isn't a woodworking group, its a group of mostly imbeciles and retards. FearMonger 8-Feb-2012
If God had a sidearm, it'd be a 1911.
Posts: 22,710
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
What's the countertop going to be used for? Butcher block would cause concern for me.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 15,331
Threads: 0
Joined: Jan 2005
non food
work bench, work area, etc
This isn't a woodworking group, its a group of mostly imbeciles and retards. FearMonger 8-Feb-2012
If God had a sidearm, it'd be a 1911.
Posts: 1,998
Threads: 1
Joined: Aug 2016
08-16-2017, 11:51 AM
(This post was last modified: 08-16-2017, 11:52 AM by Roly.)
Don't think it would have any problems as long as you made allowance for the butcher block to move a little and not be attached tightly to the base. Roly
Posts: 15,331
Threads: 0
Joined: Jan 2005
I'm leanin that way, attach with the "slot" treatment on the cabinet part and give it some room to move
This isn't a woodworking group, its a group of mostly imbeciles and retards. FearMonger 8-Feb-2012
If God had a sidearm, it'd be a 1911.
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
Mounted correctly it should be fine, stability-wise.
I'd be more concerned with the things I do in the garage would muck it up in no time. Gas, oil, greasy things, paint, etc. would be tough on a BB surface.
Posts: 22,710
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
If all the blocks in the top are oriented the same way, no problem. If some blocks are 90 degrees to the others you may see stress on some joints, exacerbated by the thinness of the block. I would be happier with a laminated strip top all edge grain up like a workbench top. My $0.02.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 15,331
Threads: 0
Joined: Jan 2005
thanks for all the input
This isn't a woodworking group, its a group of mostly imbeciles and retards. FearMonger 8-Feb-2012
If God had a sidearm, it'd be a 1911.
Posts: 3,390
Threads: 1
Joined: Jan 2002
I've had an IKEAbutcher block countertop on a bank of cabinets in my unconditioned walkout basement shop for 2.5 now with no trouble. I'm in Alabama so it probably near always humid I wouldn't say we get big swings.
-Marc
Posts: 15,331
Threads: 0
Joined: Jan 2005
waterloo, did you put a finish on your top?
This isn't a woodworking group, its a group of mostly imbeciles and retards. FearMonger 8-Feb-2012
If God had a sidearm, it'd be a 1911.
