Posts: 2,094
Threads: 0
Joined: Mar 2005
I've started making end grain cutting boards and treating them with food safe mineral oil. To those of you who have made similar projects, how long does the mineral take to dry/cure to the point where the cutting board can be handled without feeling "oily"?
there's a solution to every problem.....you just have to be willing to find it.
Posts: 2,336
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
I soak each side 8 to 12 hours, wipe off, and they are ready to use the next day.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
Mineral oil won't cure or dry. It has no polymerizing agents in it.
Use tung oil instead.
Semper fi,
Brad
Posts: 596
Threads: 0
Joined: Sep 2007
What i do, and i am sure i am not the only one, is put cut chunks of paraffin into mineral oil. Put mineral oil into a canning jar, and put cut paraffin pieces into the jar. Put the jar into the microwave, and heat it up. By and by the paraffin disappears. Put more cut pieces of paraffin into the jar, and make it hot. When the oil seems saturated, call it good. When the jar cools the mixture will turn into a solid chunk looking like paraffin. To apply put the jar into the mic, until it is liquid, and use a blue shop towel dipped into the hot oil/paraffin. Be very very careful, the jar is very very hot, as is the oil. Welding gloves can be handy. After a couple uses, the board won't feel oily, and the finish is hard.
We are very much pleased with this finish, as are the many others that use these boards. The top surface doesn't mind being refinished about once a year, so one doesn't ever have too much oil/paraffin mixed up. The bottom of our board has never been refinished.
Posts: 2,935
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
I always mixed mineral oil with paraffin too. Just like Ron said, it cures pretty quickly.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
(09-06-2017, 04:30 PM)FrankAtl Wrote: I always mixed mineral oil with paraffin too. Just like Ron said, it cures pretty quickly.
Same here. I take it out, let it sit overnight, and the next day redo it again, if it looks like it took more, I'll do it until it doesn't. Varies with wood species it seems. If gifted, I make sure to type a nice card saying NEVER machine wash, or soak for a long period, just dunk it and wipe it really well. If it looks like it's getting dry I steer them toward the pharmacy section at a superstore, and have them buy a gallon of mineral oil, then to canning supplies for paraffin wax, and have them shave 1 part of wax for every 4 parts of oil, heat in the microwave to melt the wax, allow it to cool and then let it soak in. I find a big plastic Tupperware tub that will surround the board works well, and fill to at least 1/2 the thickness of the board. Done every 6 to 8 months is generally what I find it needing. Haven't seen Howie around here forever, but he's the one got me adding the wax, works a LOT better than just the MO.
Worst thing they can do is cook ya and eat ya
GW
Posts: 2,094
Threads: 0
Joined: Mar 2005
thanks to all for the advice. i saw the mineral oil and paraffin on the woodwhisperer and think its the next thing i'll try.
there's a solution to every problem.....you just have to be willing to find it.
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
I use mineral oil and beeswax on mine. I need to recoat mine soon. The coating definitely doesn't last a year for me. It's much less.