Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
I have been thinking lately that after sanding I may use cardboard to burnish the surface to a natural glow.
I have in the past used stiff cardboard to blacken edges of turnings in ebonizing it but that was all.
What do you guys think?
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 4,434
Threads: 0
Joined: Oct 2008
Location: Central Indiana
(09-18-2017, 04:35 PM)Arlin Eastman Wrote: I have been thinking lately that after sanding I may use cardboard to burnish the surface to a natural glow.
I have in the past used stiff cardboard to blacken edges of turnings in ebonizing it but that was all.
What do you guys think?
I've never used cardboard. I would think the sharp corners where it creases when you bend it would dig grooves. I do burnish with a paper towel at fairly high speed. 2,000 rpm on a 10" dia piece, for example.
We do segmented turning, not because it is easy, but because it is hard.
Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
Nope. Never was into burnishing of any type. I prefer to use steel wool to get the last traces of sanding marks out.
It's pretty rare that I don't apply a finish so burnishing doesn't have a purpose for my work.
Cellulose runs through my veins!
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
(09-18-2017, 04:35 PM)Arlin Eastman Wrote: I have been thinking lately that after sanding I may use cardboard to burnish the surface to a natural glow.
I have in the past used stiff cardboard to blacken edges of turnings in ebonizing it but that was all.
What do you guys think?
Kraft paper. Same stuff paper grocery bags are made of. Cardboard is too stiff, and corrugated cardboard has glue in it, which will scratch your work.
Still Learning,
Allan Hill
Posts: 20,950
Threads: 0
Joined: May 2005
(09-18-2017, 11:45 PM)AHill Wrote: Kraft paper. Same stuff paper grocery bags are made of. Cardboard is too stiff, and corrugated cardboard has glue in it, which will scratch your work.
^^^ This. No, it won't suffice for smoothing sanding marks. The principle behind the burnishing is heating and hardening the surface, not abrading it.
Better to follow the leader than the pack. Less to step in.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 4,434
Threads: 0
Joined: Oct 2008
Location: Central Indiana
Something you might try, just for fun, is to burnish with the smooth back side of your gouge.
We do segmented turning, not because it is easy, but because it is hard.
Posts: 4,867
Threads: 0
Joined: Jul 2003
Location: McKinney, Texas
I haven't done a lot of turning and haven't for years now but I always used a handful of sawdust.
"Oh. Um, l-- look, i-- i-- if we built this large wooden badger" ~ Sir Bedevere
Posts: 20,950
Threads: 0
Joined: May 2005
(09-21-2017, 07:17 AM)Large Wooden Badger Wrote: I haven't done a lot of turning and haven't for years now but I always used a handful of sawdust.
Make sure it's not shavings from harder wood used on softer.
Better to follow the leader than the pack. Less to step in.
