TGIAG "seconds" Sawplates for sale (25% off)
#4
  
Hi Gang,
Over the past couple years we have made a boat load of saw plates. And during that time we made some mistakes. Most were simple ones like we punched the wrong pitch teeth or the wrong rake angle. Others were that SOMEONE   Rolleyes Rolleyes Big Grin didn't notice that the sawplate stock he picked up was 1/2" too short! And then there are a couple of cosmetic issues like a small rust spot or blank teeth at the end of a saw plate because the retoother just decided "Eh, I'm done for the night."

Anyway, we decided to clear out some of these "seconds" and offer them up here at 25% off of their normal price.

Here's a list of what we have available.
  • 5" × 16" × .032", 10 ppi @ 8° rake, Normally $30, Now $23 (Sold!)
  • 5" × 16" × .032", 11 ppi @ 8° rake (rust spots), Normally $30, Now $23
  • 7-1/4" × 28" × .042", 6ppi @ 8° rake (3/4" blank teeth), Normally $49, Now $37
  • 4" × 13 1/2" × .032", 13 ppi @ 15° rake, Normally $25, Now $19
  • 4" × 13 1/2" × .032", 13 ppi @ 15° rake, Normally $25, Now $19
  • 3" × 12" × .032", 13 ppi @ 15° rake, Normally $20, Now $15 (Sold!)
  • 3" x 12" × .020", 13 ppi @ 8° rake, Normally $20, Now $15
  • 4" x 16" x .020", 10 ppi @ 8° rake, Normally $27, Now $20
  • 4" x 16" x .020", 13 ppi @ 8° rake, Normally $27, Now $20
  • 4" x 14" x .020", 13 ppi @ 8° rake, Normally $27, Now $20(Sold!)
  • 4" x 16" x .025", 9 ppi @ 15° rake, Normally $30, Now $23
  • 5 1/4" × 16" × .032, 10 ppi @ 15° rake half back saw plate (cut to shape), Normally $30, Now $23
All prices do not include shipping and handling. 

Pair any of these saw plates up with a Brass Saw Back, Medallion, or Saw Nuts like those we offer at www.tgiag.com and you have a nice saw kit to build. And you can use the free online handle library to print out a template of the saw handle of your choosing.

If you are interested please email me at Dominic@TGIAG.com

NO PMS PLEASE!!! The PM System here is pretty bad and it makes communicating with people very difficult.

Please include your FULL MAILING ADDRESS so I can calculate the shipping cost.

Sorry,...this offer is open to those in the CONTINENTAL US ONLY.

Paypal is our preferred payment method but we accept Cashier's Checks and Money Orders (NO PERSONAL CHECKS)

Thanks,
Dominic
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#5
  Re: TGIAG "seconds" Sawplates for sale (25% off) by Blacky's Boy (Hi Gang, Over the p...)
Just updated the list with a couple that have been spoken for.

Due to overwhelming popular demand (a lot more than we figured!) we're starting to run low on brass saw backs. Since these have a 4 week lead time associated with them, we probably won't be able to replenish them in time for the holidays. So if you're on the fence now is the time to act.
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#6
  Re: TGIAG "seconds" Sawplates for sale (25% off) by Blacky's Boy (Hi Gang, Over the p...)
OK, updated the list again. There are still a lot of nice saw plates available at deeply discounted prices.
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.