Posts: 14,931
Threads: 0
Joined: Sep 2004
Location: Butler, PA
I'm making some cutting boards for Christmas presents. I typically just use Mineral Oil as a finish, but wanted to try an oil/wax blend, as is often recommended on this forum. I know beeswax is the preferred wax, but is there an alternative? Does regular old paraffin wax or canning wax work just as well? I'm looking to find something locally and haven't had any luck finding beeswax.
Thanks
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 7,421
Threads: 1
Joined: Sep 2005
I buy it from Amazon.com. It comes looking like little ball bearings.
Cheap enough and two day shipments. The pellets dissolve more easily than blocks.
https://www.amazon.com/s/ref=nb_sb_ss_i_...KTOI6XITIB
No animals were injured or killed in the production of this post.
Posts: 12,884
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
I use canning wax, which is paraffin.
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
They beat me to it: the canning wax will work just fine.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Yes. Paraffin wax. $4.00 a box at Walmart.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 10
Threads: 0
Joined: Dec 2017
walnut oil (look out for nut allergies) great cutting board finish
for the nut-allergic - flax seed oil
