12-29-2017, 11:04 AM (This post was last modified: 02-19-2020, 05:45 PM by JPRI.)
asking $90 plus ship from RI
Uncleaned as found. These were mfg by both Stanley and Sargent, 1919-30. The lateral adjust screams Sargent. Blade marked both sides. Bed marked 3020. Lever cap marked 3015. The cutter set has some light pitting, more so on the chip breaker. There's a little play in the lever cap screw, threads are fine on both mating surfaces, and holds tight when lever locks. First one of these I've found by the prominent gun maker.
This is the Sargent variety. If it says "W7" on the base, it is a round sided Bedrock clone.
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
I have a herd of these planes. They are good planes. Bob Page does a great job of restoring them for me.
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
