Needing a split nut fastener
#4
[Image: P5PtJ77.jpg]


Sorry for the use of metrics, but that was the closest I could measure.  If anybody has a few split nuts you want to off load, please shoot me a PM and name your terms.  I'm rehabbing some old saws and some of the screws are in rough shape while others look pristine.  I've had no luck sourcing them from ebay or amazon, thus I figured there would be folks on this site who might have a few laying around that could use a good home.

Thanks for your time and consideration.
Terry
Reply
#5
Pretty sure Blackys Boy (Dom) sells them along with his blades and backs.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#6
Isaac sells them in a variety of diameters -

http://www.blackburntools.com/new-tools/...index.html

Not too painful - about $7 a set for a nut and bolt.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.