Fluresant lights
#4
How does one go about checking if the ballast in these fixtures are bad or how to check the (bulb?) holders to see if they are bad? I have a 2 light fixture that after replacing both lights one is not working.
Rolleyes  Thank You, Stan
Reply
#5
Check for voltage at the wire nuts prior to the ballast. If voltage there, just replace with a LED fixture. They are cheep enough to not really worry about more proper diagnostics.
Rocket Science is more fun when you actually have rockets. 

"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Reply
#6
Cheap and cheerful diagnostics would be replacing the non-working tubes with tubes that are working. If the light then works, it's not the ballast. If it doesn't, it's the ballast.

And if the ballast is bad, I would replace the tubes with line-voltage LED bulbs, which requires removing the ballast and doing some very minor rewiring. Or toss the whole thing and buy an LED fixture. Either one. But don't get LED bulb replacements that require the ballast to be there, as a bad ballast it what started the whole thing.
Tom

“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.