FS: MiscShop Clean Up Items
#9
A recent reorganization caused the items below to float to the "time to move along" queue.  Many, if not all, are in good to as new condition.  All prices are + shipping.  Open to reasonable offers.
I can deliver within a reasonable distance from Winston Salem, NC
 
15" 3 knife planer head with knives and motor side bearing.  Knives have a small knick and could use sharpening.  Not sure of value so I'll ask $100.00
 
SOLD - Craftsman Box Joint jig - never used - $20.00
 
SOLD - Craftsman Taper Jig - never used - $10.00
 
SOLD - [s]Pair of Planer Pals for knife setting - $40.00 for the pair[/]

Knife setting jig - $7.00 - I found out that this is basically a Jet knife setting jig and can be used on any 2-7/8" planer head.  It came with my YP15 that now has a spiral head.
 
Kreg drawer mounting bracket set - $30.00
 
Norton water stones - 8000 grit (89508), 1000 grit (89506) and a flattening stone - $85.00 for all three.  I will sell separately - make an offer
 
Lee valley Water Pond - $30.00 - buy all three stones and the water pond for $105.00

Drill Doctor model 250 Handyman - $40.00
 
Thanks for looking and feel free to request additional information or pictures.
 
Thanks
Rick

   
[attachment=7723]
[attachment=7729]
[attachment=7727]
   
   
[attachment=7726]
[attachment=7728]
   
Rick

Reply
#10
(01-30-2018, 12:25 PM)Rick_B Wrote: A recent reorganization caused the items below to float to the "time to move along" queue.  Many, if not all, are in good to as new condition.  All prices are + shipping.  Open to reasonable offers.
I can deliver within a reasonable distance from Winston Salem, NC
 
15" 3 knife planer head with knives and motor side bearing.  Knives have a small knick and could use sharpening.  Not sure of value so I'll ask $100.00
 
Craftsman Box Joint jig - never used - $20.00
 
Craftsman Taper Jig - never used - $10.00
 
Pair of Planer Pals for knife setting - $40.00 for the pair
 
Unknown Knife setting jig - $7.00
 
Kreg drawer mounting bracket set - $30.00
 
Norton water stones - 8000 grit (89508), 1000 grit (89506) and a flattening stone - $85.00 for all three.  I will sell separately - make an offer
 
Lee valley Water Pond - $30.00 - buy all three stones and the water pond for $105.00

Drill Doctor model 250 Handyman - $40.00
 
Thanks for looking and feel free to request additional information or pictures.
 
Thanks
Rick


PM sent on the planer pals...
Eric
Reply
#11
Pm sent for taper jig
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes
[Image: 07-15-28-122_512.gif]
Reply
#12
Sold items updated - plenty left and more to come

Thanks
Rick

Reply
#13
(01-30-2018, 12:25 PM)Rick_B Wrote: A recent reorganization caused the items below to float to the "time to move along" queue.  Many, if not all, are in good to as new condition.  All prices are + shipping.  Open to reasonable offers.
I can deliver within a reasonable distance from Winston Salem, NC
 
15" 3 knife planer head with knives and motor side bearing.  Knives have a small knick and could use sharpening.  Not sure of value so I'll ask $100.00
 
SOLD - Craftsman Box Joint jig - never used - $20.00
 
SOLD - Craftsman Taper Jig - never used - $10.00
 
SOLD - Pair of Planer Pals for knife setting - $40.00 for the pair
 
Unknown Knife setting jig - $7.00
 
Kreg drawer mounting bracket set - $30.00
 
SOLD - Norton water stones - 8000 grit (89508), 1000 grit (89506) and a flattening stone - $85.00 for all three.  I will sell separately - make an offer
 
SOLD - Lee valley Water Pond - $30.00 - buy all three stones and the water pond for $105.00

Drill Doctor model 250 Handyman - $40.00
 
Thanks for looking and feel free to request additional information or pictures.
 
Thanks
Rick



Update for sold items
Rick

Reply
#14
BTTT

Rick
Rick

Reply
#15
(01-30-2018, 12:25 PM)Rick_B Wrote: A recent reorganization caused the items below to float to the "time to move along" queue.  Many, if not all, are in good to as new condition.  All prices are + shipping.  Open to reasonable offers.
I can deliver within a reasonable distance from Winston Salem, NC
 
15" 3 knife planer head with knives and motor side bearing.  Knives have a small knick and could use sharpening.  Not sure of value so I'll ask $100.00
 
SOLD - Craftsman Box Joint jig - never used - $20.00
 
SOLD - Craftsman Taper Jig - never used - $10.00
 
SOLD - Pair of Planer Pals for knife setting - $40.00 for the pair

SOLD - Knife setting jig - $7.00 - I found out that this is basically a Jet knife setting jig and can be used on any 2-7/8" planer head.  It came with my YP15 that now has a spiral head.
 
Kreg drawer mounting bracket set - $30.00
 
SOLD - Norton water stones - 8000 grit (89508), 1000 grit (89506) and a flattening stone - $85.00 for all three.  I will sell separately - make an offer
 
SOLD - Lee valley Water Pond - $30.00 - buy all three stones and the water pond for $105.00

Drill Doctor model 250 Handyman - $40.00
 
Thanks for looking and feel free to request additional information or pictures.
 
Thanks
Rick

Update for sold items

Thanks
Rick

Reply
#16
(02-06-2018, 01:58 PM)Rick_B Wrote: Update for sold items

Thanks
BTTT for the weekend crowd.  Also price reduction - Kreg Drawer Brackets - $25;  Drill Doctor - $35  Buy them both for $55.

Looking for offers on the planer head
Rick

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.