Routerman
#21
I put some of these on my 690 bases.

http://www.rockler.com/cam-clamp
Maybe cut the head off that bolt.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#22
It's interesting that the parts diagram for the PC310 shows both the knob and the lever.

https://www.ereplacementparts.com/porter..._1867.html
Reply
#23
(03-08-2018, 08:58 PM)Lynden Wrote: It's interesting that the parts diagram for the PC310 shows both the knob and the lever.

https://www.ereplacementparts.com/porter..._1867.html


Possibly a type # thing.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#24
(03-08-2018, 08:43 PM)Stwood_ Wrote: I put some of these on my 690 bases.

http://www.rockler.com/cam-clamp
Maybe cut the head off that bolt.

So, you bought a Rockler T-bolt to match to a Rockler clamp - can see the match - does the clamp arm get in the way of using the router?  Can you post a pic?  Thanks for the suggestion.  Dave
Smile
Piedmont North Carolina
Reply
#25
I've got the LV cam clamps also. My rockler seems to be hiding. Routers tend to do that.
Laugh 

LV http://www.leevalley.com/us/hardware/pag...1994,45034

   

   

I used the same T-bolt that is on the pc base.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#26
(03-08-2018, 10:20 PM)Stwood_ Wrote: I've got the LV cam clamps also. My rockler seems to be hiding. Routers tend to do that.
Laugh 

LV http://www.leevalley.com/us/hardware/pag...1994,45034





I used the same T-bolt that is on the pc base.

Thanks - will look into that option, too!  Dave
Smile
Piedmont North Carolina
Reply
#27
All I know is that he was a great guy.  He offered to help us vets and I could not think of a way we needed his help at the time since we did not know anything about a router.
Yes
Laugh    I should say we still know very little but I did get his video at Woodcraft and that helped a ton.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#28
I was sad to discover his site is off line. Even as he had commercialized it, he had left a lot of information and thoughts on there; extemporaneous stuff not in his books, now lost.
Reply
#29
Try the wayback machine.
Lee
Reply
#30
(03-10-2018, 07:58 AM)srv52761 Wrote: I was sad to discover his site is off line.  Even as he had commercialized it, he had left a lot of information and thoughts on there; extemporaneous stuff not in his books, now lost.

Somebody put me in contact with his wife as I was looking to host his content for no financial gain.  She was not interested, just wants to move on with her life.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.