Second portable router table - suggestions?
#19
I just came from Lowes and they are showing a Kobalt router table with a router for $169.00
https://www.lowes.com/pd/Kobalt-Fixed-Co...gLuU_D_BwE

It looks pretty robust. The table top is entirely made of machined cast aluminum. It has resin bases and 12 amp motor. I have not seen any reviews yet but it looks like a good deal.
No animals were injured or killed in the production of this post.
Reply
#20
I have this one from JessEm about 5 years ago and with the help of Pat Zabrocki who is going to help me build a portable full size one with drawers.  I still have the frame and the skirting with the on/off switch and if you can find a way to pick it up you can have it.  I do need to find a paddle switch for my future one and hope Pat can point me in the right direction and get one for my Grizzly tablesaw to.
Yes

Sample


https://www.amazon.com/jessem-03200-benc...b003e625nc
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#21
This is a good price on a switch:

http://www.rockler.com/safety-power-tool-switch

I bought the "same" from Amazon a few years back and it is now $49.00.  They might not be identical, but they sure look close.

https://www.amazon.com/gp/product/B002C4...UTF8&psc=1

[Image: 20915-11-1000.jpg]
No animals were injured or killed in the production of this post.
Reply
#22
I had the Bench Dog benchtop table. I really liked it for what it was, all baltic birch construction. But it looks like it isnt made anymore, thats a shame. Probably the Bosch table is the closest competitor.
Reply
#23
As stated, a piece of plywood, with a router or 2 bolted to it.
Saw one with 3 routers, set for making rails,stiles, and raised panels.
I've clamped a fence (piece of wood) to the base of a router, and clamped the router in a vise.
Router "table" doesn't have to be fancy to work.
I long for the days when Coke was a soft drink, and Black and Decker was a quality tool.
Happiness is a snipe free planer
Reply
#24
A square piece of plywood or old cabinet top with a milk crate screwed to the bottom. Cut the top out of the crate to allow you t screw the router base to the underside. Drill a hole large enough to allow the largest bit to clear. A couple of small clamps and a straight piece of wood for the fence and you are done. Should be able to do it for less than $20 if you are thrifty
1st class birdhouse builder/scrapwood mfg.
Reply
#25
This guy has it as simple as it comes. 

https://youtu.be/GgA-69nnKFo
"Life is too short for bad tools.".-- Pedder 7/22/11
Reply
#26
(04-01-2018, 10:53 AM)giradman Wrote: Hi All - my main router table is the Veritas steel one w/ an excellent right-angle attachment, but the bit I may want to use seems never to be in the table - UGHH!  Now, I have a 'small' Rockler portable table (about $60) that just seems not very useful except for trim routers.

A second table w/ a different bit (e.g. a straight in one table & a profile bit in the other) would be convenient, but needs to be relatively inexpensive, small, and portable just to get out the way quickly.  Today I received the flyer below advertising the Bosch table @ a great price - now I know they offer a better table, too; the Bosch Reviews are great AND negative (overall, 3.6/5) - SO, what are some of your favorite secondary commercial router tables (know that there are plenty on the market) - thinking of a few hundred bucks - and I know there will be a LOT of 'build your own' recommendations, so please post those too (although that's my second choice).  Thanks for any comments.  Dave
Smile

I do a lot of pattern routing.  My Bosch is actually my #1 table.  The pattern table is a 24" by 24" piece of 3/4" oak plywood.  I simply clamp it down on a pair of horses when I use it.  Cheap and quick.  Very portable, easy to store.  The really big jobs are done on a shaper table.
Non Carborundum Illigitimus
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.