04-19-2018, 08:30 AM
(This post was last modified: 04-20-2018, 11:28 AM by dov tayles.)
Hi all,
I've been inactive on WoodNet for a while, but go back quite a ways. I am looking to sell some hardware at a fair price, with free shipping. Please contact me with any questions. Because there's been over 100 views, and no response, I've dropped the prices as shown below. I didn't drop the cost of 10, because shipping eats a lot of the cost for so few. I'll accept paypal or a personal check.
Threaded Inserts:
I have multiple 10 packs of new old stock KNOCK DOWN KD Fasteners, 1/4-20 X 13mm Die Cast Type A Zinc threaded inserts, with barbed exterior. The 10 packs are labeled Woodworkers Supply, Part No. 812-438. Larger quantities may be bagged in bulk. To use, tap in place in prebored holes to add1/4-20 machine threads to wooden components.
They have no flanges, so they can be driven below the wood surface. 13mm length.
Use a 11/32" diameter pilot hole in softwoods and a 23/64" diameter pilot hole in harder materials.
2" bolts, allen head:
I have multiple 10 packs of KNOCK DOWN bolts, 1/4-20 X 2" dark bronze finish steel. Can be driven with a 4mm or 5/32" allen driver. Low profile head, with outside diameter of head of 5/8". They are unused, but have been gathering some dust.
Prices all include free shipping, and are as follows - note these prices are for 10 [or more] pieces, not for pairs. If you want them in pairs, that's fine, let me know - so, for example, 10 inserts will cost the same as 5 pairs of inserts and bolts. I am happy to provide them any way you like.
Pack of 10: $5.99
Pack of 30: $15
Pack of 50: $25
Pack of 100: $45
Pack of 250: $100
Pack of 500: $190
I've been inactive on WoodNet for a while, but go back quite a ways. I am looking to sell some hardware at a fair price, with free shipping. Please contact me with any questions. Because there's been over 100 views, and no response, I've dropped the prices as shown below. I didn't drop the cost of 10, because shipping eats a lot of the cost for so few. I'll accept paypal or a personal check.
Threaded Inserts:
I have multiple 10 packs of new old stock KNOCK DOWN KD Fasteners, 1/4-20 X 13mm Die Cast Type A Zinc threaded inserts, with barbed exterior. The 10 packs are labeled Woodworkers Supply, Part No. 812-438. Larger quantities may be bagged in bulk. To use, tap in place in prebored holes to add1/4-20 machine threads to wooden components.
They have no flanges, so they can be driven below the wood surface. 13mm length.
Use a 11/32" diameter pilot hole in softwoods and a 23/64" diameter pilot hole in harder materials.
2" bolts, allen head:
I have multiple 10 packs of KNOCK DOWN bolts, 1/4-20 X 2" dark bronze finish steel. Can be driven with a 4mm or 5/32" allen driver. Low profile head, with outside diameter of head of 5/8". They are unused, but have been gathering some dust.
Prices all include free shipping, and are as follows - note these prices are for 10 [or more] pieces, not for pairs. If you want them in pairs, that's fine, let me know - so, for example, 10 inserts will cost the same as 5 pairs of inserts and bolts. I am happy to provide them any way you like.
Pack of 10: $5.99
Pack of 30: $15
Pack of 50: $25
Pack of 100: $45
Pack of 250: $100
Pack of 500: $190