Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more
#11
  
Hi,

First up for sale I have a set of 7 vintage Buck Bros. incannel crank neck chisels ( pattern makers incannel gouges?) in roughly the following sizes: 3/16", 5/16", 3/8", 9/16", 5/8", 3/4", 7/8". The chisels are in beautiful condition, pretty much like new.

$180 for the set

   

   

   

Next for sale are three vintage Union chisels in the following sizes: ~1 11/16, ~7/8", ~9/16", the chisels have the bevel on the outside and have a thumbnail profile. The handles are good and sound and the chisels are in very nice shape without any pitting or major damage.

$40 for the 1 11/16" chisel, $35 each for the 7/8" and 9/16" chisel

   


   


In the following three pictures are two very large and substantial vintage Underhill mortise (framing or millwright I believe) chisels ( 1/4" and 3/8"). Both chisels have F.W.B tastefully stamped on them. The handles are good and the substantial size of the chisels should make prying with them and driving them into wood a pleasure.



$70 for both chisels



Ward and Payne 1 1/2" firmer chisel. The handle had bad damage so I repaired it with a piece of beech and blended in the repair. Good English cast steel. No pitting, a vintage tool in nice shape.



$35 for the chisel



Vintage Charles Buck cast steel 3/4" firmer ( maybe pairing?) chisel. It has UC 41 stamped by the makers mark. The chisel is a chisel that came from the University of California - Berkeley, no pitting, no serious damage.


$30 for the chisel

   


   


   
Reply
#12
  Re: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo ([size=small][font=Ve...)
7 Japanese Crank Necked Pairing Chisels. I cannot identify the makers, but the chisels themselves are in very nice condition. No real faults to the chisels beside one chisel with oxidation marks on its back.

The remaining chisels are available in roughly the following sizes: 1/2", 1/2" dovetail pending

$50 dollars each

   

   

   

   

Set of 3 Fujikawa White Steel Mortising chisels, brand new, never used. Sizes: 15/32" ~ 1/2", 11/32" ~ 3/8", 7/32" ~ 1/4"

$150 for an excellent set of quality Japanese mortise chisels.

   

   

Lastly, a Koyama-Ichi white steel 15/16" chisel and an maker-unknown 1 9/16" chisel. The Koyama-Ichi chisel is pretty much new and the maker unknown chisel is in great shape, no deformed hollows. The koyama-ichi has very tiny micro-chipping along the edge, but it isnt severe and can be sorted out quickly with a medium india stone.

$50 for the koyama-ichi chisel, $50 for the 1 9/16" maker-unknown chisel.

   

   
Reply
#13
  Re: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo ([size=small][font=Ve...)
PM sent for the Japanese 1/2" cranked neck (dovetail) chisel.
Reply
#14
  Re: RE: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo ([size=small][font=Ve...)
PM went on the last two wide chisels. 

Jeff
It's time for the patriots to stand up!
Reply
#15
  Re: RE: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by AztecKing (PM went on the last ...)
(06-09-2018, 01:25 AM)AztecKing Wrote: PM went on the last two wide chisels. 

Jeff

Bump with price updates:

7 Vintage buck bros pattermakers gouges: $160
Vintage Union Gouges in the following sizes: ~1 11/16, ~7/8", ~9/16": $30 for the 1 11/16" chisel, $25 each for the 7/8" and 9/16" chisel
1/4 and 3/8" Underhill heavy mortising chisels, $60 for the pair.
Ward and Payne 1 1/2" firmer chisel: $25 for the chisel
Vintage Charles Buck cast steel 3/4" firmer: $20 for the chisel

1/2" Japanese crank neck chisel: $45 dollars
3 Fujikawa White Steel Mortising chisels, brand new, never used. Sizes: 15/32" ~ 1/2", 11/32" ~ 3/8", 7/32" ~ 1/4: $135
Reply
#16
  Re: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo ([size=small][font=Ve...)
Price update:

7 Vintage buck bros pattermakers incannel gouges: $140

Vintage Union Gouges in the following sizes: ~1 11/16, ~7/8", ~9/16": $25 for the 1 11/16" chisel, $20 each for the 7/8" and 9/16" chisel

1/4 and 3/8" Underhill heavy mortising chisels, $55 for the pair, these are solid mortise chisels in two very handy sizes.

Ward and Payne 1 1/2" firmer chisel: $25 for the chisel, great chisel for pairing and misc. duties.

Vintage Charles Buck cast steel 3/4" firmer: $18 for the chisel, another chisel that will do well with pairing duties.

1/2" Japanese crank neck chisel: $45 dollars, can't go lower than this, this chisel will be heading to eBay soon.

3 Fujikawa White Steel Mortising chisels, brand new, never used. Sizes: 15/32" ~ rough 1/2", 11/32" ~ rough 3/8", 7/32" ~ rough 1/4: $130
Reply
#17
  Re: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo ([size=small][font=Ve...)
PM sent on 1/2" crank neck chisel.

Cliff
You can only be young once
but you can be immature forever.
Reply
#18
  Re: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo ([size=small][font=Ve...)
Price update:

7 Vintage buck bros pattermakers incannel gouges: Pending

Vintage Union Gouges in the following sizes:
~1 11/16, $20
~7/8", $18
~9/16": $18

1/4 and 3/8" Underhill heavy mortising chisels, $55 for the pair, these are very solid mortise chisels unlike smaller sash mortise chisels.

Ward and Payne 1 1/2" firmer chisel: $20 for the chisel, great chisel for pairing and misc. duties.

Vintage Charles Buck cast steel 3/4" firmer: $16 for the chisel, another chisel that will do well with pairing duties.

3 Fujikawa White Steel Mortising chisels, brand new, never used. Sizes: 15/32" ~ rough 1/2",
11/32" ~ rough 3/8",
7/32" ~ rough 1/4

$125 for the chisels, they're heading to eBay after this.

the chisels cost $185 from tools from Japan, this is a chance to get very solid mortise chisels at a substantial discount.
Reply
#19
  Re: RE: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo (Price update: 7 V...)
(06-19-2018, 12:30 PM)Christian Castillo Wrote: Price update:

7 Vintage buck bros pattermakers incannel gouges: Pending

Vintage Union Gouges in the following sizes:
~1 11/16, $20
~7/8",  $18
~9/16": $18

1/4 and 3/8" Underhill heavy mortising chisels, $55 for the pair, these are very solid mortise chisels unlike smaller sash mortise chisels.

Ward and Payne 1 1/2" firmer chisel: $20 for the chisel, great chisel for pairing and misc. duties.

Vintage Charles Buck cast steel 3/4" firmer: $16 for the chisel, another chisel that will do well with pairing duties.

3 Fujikawa White Steel Mortising chisels, brand new, never used. Sizes: 15/32" ~ rough 1/2",
11/32" ~ rough 3/8",
7/32" ~ rough 1/4

$125 for the chisels, they're heading to eBay after this.

the chisels cost $185 from tools from Japan, this is a chance to get very solid mortise chisels at a substantial discount.

Price update:

Vintage Union Gouges in the following sizes: 
~1 11/16 , ~7/8" , ~9/16"
$50 dollars for all three

Ward and Payne 1 1/2" firmer chisel: $18 for the chisel, great chisel for pairing and misc. duties.

Vintage Charles Buck cast steel 3/4" firmer: $15 for the chisel, another chisel that will do well with pairing duties.

3 Fujikawa White Steel Mortising chisels, brand new, never used. 
Sizes: 
15/32" ~ rough 1/2", 
11/32" ~ rough 3/8", 
7/32" ~ rough 1/4

$125 for the chisels, they're heading to eBay after this.
Reply
#20
  Re: Chisels: Buck Bros Pattern maker gouge set, Japanese Crank neck chisels, mortise+more by Christian Castillo ([size=small][font=Ve...)
I can't believe those Fujikawa white paper mortise chisels are still here... Sooooo tempting...
" The founding fathers weren't trying to protect citizens' rights to have an interesting hobby." I Learn Each Day 1/18/13

http://www.RUSTHUNTER.com
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)