Wolverine Grinding Jig
#3
    Wolverine Grinding Jig allows you to create accurate cutting angles and straight edges. Your tools will be easier and safer to work with! The Wolverine system is furnished with two bases, one to mount under each wheel, which permit two simultaneous grinding set ups. Each base accepts either sliding arm. Arms are effortlessly adjusted or secured by a cam locking device. The ā€œVā€ arm attachment is 27" in length and is perfect for sharpening gouges, skews, chisels, or carving tools. Just pull the arm out until the tool rests on the wheel at the proper angle and you're ready to start. The 3" x 5" platform jig uses quick release ratchet handles for angle adjustments and is perfect for sharpening scrapers. Wolverine comes complete with instructions for installation and use.


System has been used but is in good condition.

Price is $50 + shipping from 19711.

   
   
Jim

Demonstrating every day that enthusiasm cannot overcome a lack of talent!
Reply
#4
I will take it Pm on it's way
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.