09-30-2018, 06:58 AM
Many months ago I disassembled this Jessem Mast-R-Lift to replace a broken plastic drive sprocket....Some of you folks helped me with the last problem. I should have taken pictures of the unassembled lift before hand.
This is the model in the original configuration from Jessem.....
And below is the closest I could come to remembering how this lift should be assembled.....
And then there is the nagging little left over piece...which I have no idea what it does or where it goes........Grrrrr....
If you have one of these or clear photos of the original set up...I sure would like to know what it is supposed to look like....
Thanks for everything,
Andrew
This is the model in the original configuration from Jessem.....
And below is the closest I could come to remembering how this lift should be assembled.....
And then there is the nagging little left over piece...which I have no idea what it does or where it goes........Grrrrr....
If you have one of these or clear photos of the original set up...I sure would like to know what it is supposed to look like....
Thanks for everything,
Andrew
"That's like getting a running start and diving headfirst into the vortex."
Steve Freidman 4/21/2013
Steve Freidman 4/21/2013