10-05-2018, 07:00 AM
Bought some tools from a retiring contractor and selling the ones I already have. Prefer local pick up in Los Angeles area.
Festool Domino DF500. One of the registration pins on the fence is stuck but otherwise good condition. I always use the marks for registration anyways but something to be aware of. This is the set version which includes both the trim and cross stop. Also have an empty sytainer for the dominos and 4 extra bits. $725 for the domino $100 for the systainer and bits. $800 for both.
![[Image: 00l0l_gVw7zWpaHMo_1200x900.jpg]](https://images.craigslist.org/00l0l_gVw7zWpaHMo_1200x900.jpg)
![[Image: 00404_4TLybouD0mS_1200x900.jpg]](https://images.craigslist.org/00404_4TLybouD0mS_1200x900.jpg)
![[Image: 00F0F_fVzvjRuUrET_1200x900.jpg]](https://images.craigslist.org/00F0F_fVzvjRuUrET_1200x900.jpg)
![[Image: 00A0A_4QLd9QNbXN2_1200x900.jpg]](https://images.craigslist.org/00A0A_4QLd9QNbXN2_1200x900.jpg)
![[Image: 00s0s_ewGGSeMwg8D_1200x900.jpg]](https://images.craigslist.org/00s0s_ewGGSeMwg8D_1200x900.jpg)
Festool OF1400 router. One of the turret stops is broken and the cord has been damaged and repaired. Works fine as is. I may have an extra undamaged cord. Also have the edge guide but not the rods.
$375 for the router. $50 for the edge guide. $400 for both
![[Image: 00m0m_ahxshPEbmAU_1200x900.jpg]](https://images.craigslist.org/00m0m_ahxshPEbmAU_1200x900.jpg)
![[Image: 00h0h_h9OP4KXD7T9_1200x900.jpg]](https://images.craigslist.org/00h0h_h9OP4KXD7T9_1200x900.jpg)
![[Image: 00R0R_fdUF3lstBg9_1200x900.jpg]](https://images.craigslist.org/00R0R_fdUF3lstBg9_1200x900.jpg)
Festool MFT 1080. This is the complete set with rails, stops etc. Table itself is still flat and very useable but has cuts on both sides. Also have a pair of clamping elements for clamping items horizontally on the table. One of the elements doesn't include the bottom knob. I don't have pics for it just yet. $380 for the MFT and $50 for the clamping elements. $420 for both
Festool Domino DF500. One of the registration pins on the fence is stuck but otherwise good condition. I always use the marks for registration anyways but something to be aware of. This is the set version which includes both the trim and cross stop. Also have an empty sytainer for the dominos and 4 extra bits. $725 for the domino $100 for the systainer and bits. $800 for both.
Festool OF1400 router. One of the turret stops is broken and the cord has been damaged and repaired. Works fine as is. I may have an extra undamaged cord. Also have the edge guide but not the rods.
$375 for the router. $50 for the edge guide. $400 for both
Festool MFT 1080. This is the complete set with rails, stops etc. Table itself is still flat and very useable but has cuts on both sides. Also have a pair of clamping elements for clamping items horizontally on the table. One of the elements doesn't include the bottom knob. I don't have pics for it just yet. $380 for the MFT and $50 for the clamping elements. $420 for both