A stroll down memory lane
#21
I made a lot of tools about 10 years ago. I'll have ti dig them out.

Router Jim and others made tools also
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#22
(10-15-2018, 10:08 PM)Stwood_ Wrote: I made a lot of tools about 10 years ago. I'll have ti dig them out.

Router Jim and others made tools also

It's always fun to design and make a tool, but can you identify why it's put away and not used? What makes it indispensable? 

Doing dovetails requires several layout tools. Jack's jig is close to a One-for-All multi-tool. Mine always suffer from complexity issues. It might just be easier to have the original various tools. After all I always need a pencil.
Reply
#23
(10-16-2018, 11:24 AM)hbmcc Wrote: It's always fun to design and make a tool, but can you identify why it's put away and not used? What makes it indispensable? 

Doing dovetails requires several layout tools. Jack's jig is close to a One-for-All multi-tool. Mine always suffer from complexity issues. It might just be easier to have the original various tools. After all I always need a pencil.

I have one of the Hamilton gauges Jack's is based on. The marking knife makes it one of my most accurate tools for marking baselines for dovetails, BUT I find I do not use it very much. Why? Because the thing was expensive and is so pretty, I guess I'm psychologically afraid of damaging it! (Maybe!).

Like all tools, I seem to have way too many of them, and my most used is my Titemark.
Waiting to grow up beyond being just a member
www.metaltech-pm.com
Reply
#24
I remember those Jack! In fact you helped me out on a couple of issues. I made a couple of them and gave one to my SS one year. IIRC it was Fr. Peter. I think I still have that drawing kicking around somewhere.

I gave another to my buddy Mike who runs TGIAG with me
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#25
(10-17-2018, 02:55 PM)Blacky Wrote: I remember those Jack! In fact you helped me out on a couple of issues.  I made a couple of them and gave one to my SS one year. IIRC it was Fr. Peter. I think I still have that drawing kicking around somewhere.

I gave another to my buddy Mike who runs TGIAG with me
.........................
I also remember you making a couple of them Dom.....and you did an excellent job on them.,..they looked great..I probably still have a photo or two of them somewhere...
Winkgrin
Often Tested.    Always Faithful.      Brothers Forever

Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Upset





Reply
#26
I didn't make one, but I'm another one who just doesn't find time in the shop the last couple of years. My kids are in the thick of life, ages 11-16, and it's been a busy few years professionally. I hope I can get back to woodworking and toolmaking someday soon. I do miss the picture build-alongs and active discussions.
Reply
#27
I recently got back into the shop building a hot wire foam cutter to use in making RC Planes. I got to use my planes to surface the wood and hand saws to cut it to shape. It was very enjoyable and it felt good to spend time in the shop again.

My "bow" as everyone at RC Groups calls them, looks EXACTLY like a bow saw in build and even uses the twine and paddle tensioning mechanism that my bow saw uses. Instead of a saw blade I have mig welding wire held taut between the arms.

[Image: a11286088-244-24in%20hot%20wire%20bow.jpg]
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#28
(10-19-2018, 06:35 AM)Blacky Wrote: I recently got back into the shop building a hot wire foam cutter to use in making RC Planes. I got to use my planes to surface the wood and hand saws to cut it to shape. It was very enjoyable and it felt good to spend time in the shop again.

My "bow" as everyone at RC Groups calls them, looks EXACTLY like a bow saw in build and even uses the twine and paddle tensioning mechanism that my bow saw uses. Instead of a saw blade I have mig welding wire held taut between the arms.

[Image: a11286088-244-24in%20hot%20wire%20bow.jpg]

......................
That's pretty cool, Dom...How much voltage does it require ??
Often Tested.    Always Faithful.      Brothers Forever

Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Upset





Reply
#29
I used the 12V 10a leads from the power supply and then run that through a brushed electronic speed controller (ESC). The servo tester allows me to vary the voltage. It actually works a lot better than I expected
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#30
(10-17-2018, 05:16 AM)Tony Z Wrote: I have one of the Hamilton gauges Jack's is based on.  The marking knife makes it one of my most accurate tools for marking baselines for dovetails, BUT I find I do not use it very much.  Why?  Because the thing was expensive and is so pretty, I guess I'm psychologically afraid of damaging it! (Maybe!).

Like all tools, I seem to have way too many of them, and my most used is my Titemark.

I've got one of Jeff's gauges. Won it in a giveaway I think, long ago. One of his first ones.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.