11-05-2018, 08:08 PM
Any tips on how to adjust a Jet Riving knife? Something is seriously messed up on mine.
tia.. Dave
tia.. Dave
Jet Riving knife adjustment
|
11-05-2018, 08:08 PM
Any tips on how to adjust a Jet Riving knife? Something is seriously messed up on mine.
tia.. Dave
11-06-2018, 09:08 PM
Post didn't take.. odd.. trying again
Xacta.. thanks
11-08-2018, 04:55 AM
Check out paage 11 of the manual here.
https://content.jettools.com/assets/manu...man_EN.pdf I know you have probably done that, but what issues are you having? These are pretty simple mechanisms. They have some set screws for adjusting alignment and a cam clamp to lock the knife or guard in place. Is the guard way out of alignment? If so are blade stabilizers installed?
Lee
11-08-2018, 12:58 PM
You might also want to check that the knife is not too thick for the blade.
To do this easily, you can do a short stop cut on some material. Then slip the slot you just cut over the riving knife itself to insure there is clearance. If there isn't, you would need a different knife or blade.
Lee
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.