Stanley #55 Chest
#11
  
Really should build a storage box/chest for my #55 as the flea market cardboard box it came in is deteriorating. Luckily, the wood boxes for the cutters are not damaged or missing.

Did the original #55 wood boxes have fitted compartments/dividers for the various parts?  Once saw what was claimed to be an original #55 chest with dividers and the wood boxes for the cutters were on the end(s) the chest? Have also seen chests with the plane assembled and various parts and cutter boxes loose in the box.

Did a Google search and the few pictures that came up did not show the interior very well. Did a search here, but nothing came up concerning the #55 chest/box.

Appreciate any help, ideas, etc.
Reply
#12
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
(12-01-2018, 04:39 PM)Ray Newman Wrote: Really should build a storage box/chest for my #55 as the flea market cardboard box it came in is deteriorating. Luckily, the wood boxes for the cutters are not damaged or missing.

Did the original #55 wood boxes have fitted compartments/dividers for the various parts?  Once saw what was claimed to be an original #55 chest with dividers and the wood boxes for the cutters were on the end(s) the chest? Have also seen chests with the plane assembled and various parts and cutter boxes loose in the box.

Did a Google search and the few pictures that came up did not show the interior very well. Did a search here, but nothing came up concerning the #55 chest/box.

Appreciate any help, ideas, etc.
I have an old 55 box. It's just a box. Nothing inside.
Reply
#13
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
I need to make one also, probably for a 45 too. I think I posted here for dimensions etc, a few years ago. I never did get it made, and have lost all the info. Not a big fan of the search feature here.
Reply
#14
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
https://forums.woodnet.net/showthread.php?tid=6664576



google.



works much faster.
Mark Singleton

Bene Vivere Quam Optima Est Ultio
Reply
#15
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
Thanks for the hot tip. I guess I need to get going on it before I loose it again.
Reply
#16
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
Ray,

This might help. My grandfather made this box. The 4 cutter boxes slide in.
Kinda cool, the box handle is made from a pine knot, wire and square head bolts..
[Image: VacationWashington121.jpg]

[Image: VacationWashington123.jpg]
Reply
#17
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
Snipe Hunter: thanks for the pictures!
Reply
#18
  Re: RE: Stanley #55 Chest by Ray Newman (Snipe Hunter: thanks...)
(12-04-2018, 11:57 PM)Ray Newman Wrote: Snipe Hunter: thanks for the pictures!
No problem. I have a few of my grandfather's tools and the "55" is my most treasured. My Dad inherited in the 60's and Dad gave it to me a couple years ago to make sure it stayed off the antique store shelf. Dad never took it out of the box so the shavings in the bottom were Grandpa's. Dad passed this year. I'm 57 and have a nephew on the west coast who is a woodworker, he's got Dad's/Grandad's Uni-Saw. I suspect I'll pass the "55" and the shavings to him one day but I'll be sure to use it first.
Reply
#19
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
Is the "55" box the same size as the "45"? That would be too easy!
Reply
#20
  Re: Stanley #55 Chest by Ray Newman ([color=#000000][size...)
Doubt it....twice as much plane? 
   
Stanley No. 45 box, Roxton Pond, QUE. Canada 
   
Plane doesn't quite fit this way...
   
Have to tear it down...
   
Has only two rows of cutters...unlike the 55 that needs 4 rows..
   
Not enough room for 2 fences, and the sliding stock....and then the main stock  with all the other parts,

There was a Stanley box with a sliding lid, that you could sit the plane into, it had the 4 cutter boxes stashed along one side wall...Main stock had enough room to sit on it's skates.

Lid just slid into grooves around the top of the box...like this..
   
YMMV
Show me a picture, I'll build a project from that
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)