Posts: 231
Threads: 0
Joined: Apr 2006
I made two coffee tables for my daughter to go on both sides of her couch. She bought two 12" X 24" white marble tiles to use on the table tops and I built the rest of the coffee table around it. I am putting a sheet of 1/4" MDF directly under the tile, which I will attach to the table frame with Titebond glue. My question is what adhesive to use between the MDF and the tile? I planned on using epoxy, but would be interested to know if there is a better adhesive for this application. Thank you as always...FPT.
Posts: 589
Threads: 0
Joined: Jan 2017
Location: Marina del Rey
I would use 3M 5200.
Wood is good.
Posts: 7,421
Threads: 1
Joined: Sep 2005
I would use E6000, a styrene based adhesive that bonds both smooth and porous materials. It resembles silicone adhesive on steroids. It remains flexible but has far more holding power than silicone adhesive.
http://eclecticproducts.com/products/e6000/
Lowes and Michael's Hobby both carry this as does Amazon.com.
Use with ventilation. It has a strong odor and is probably not healthy to breath in while curing. If you are going to do a lot of work with E6000, then wear gloves. For occasional use, just use with ventilation.
Once cured it is very strong, and no odor. Clear and remains flexible.
No animals were injured or killed in the production of this post.
Posts: 12,666
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Epoxy will certainly work, but I like Loctite Polyseamseal because it cleans up with water, and it works. PL Adhesive works great, too, but it's not water cleanup.
John
Posts: 7,421
Threads: 1
Joined: Sep 2005
I suspect that the weight of the tile is almost enough to keep it in place. Indeed I might be tempted to use double faced tape so I could change out the tiles at a later date to give it a new look.
No animals were injured or killed in the production of this post.
Posts: 23,922
Threads: 2
Joined: Sep 2003
Location: Missouri
Just get a tube of pure silicone caulk for your caulking gun. About 6-8 bucks at the hardware store.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 12,451
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
(12-21-2018, 09:38 PM)Stwood_ Wrote: Just get a tube of pure silicone caulk for your caulking gun. About 6-8 bucks at the hardware store.
That would be my suggestion as well...almost anything will work, you/re not looking for a wood-to-wood type bond, just something to secure it in place.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 231
Threads: 0
Joined: Apr 2006
Great recommendations - thank you all! FPT
Posts: 20,903
Threads: 0
Joined: Oct 2003
I’m a LEXEL user. Bonds almost anything and is waterproof.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 1,870
Threads: 0
Joined: Feb 2006
Location: Eastern WA
12-22-2018, 10:59 AM
(This post was last modified: 12-22-2018, 11:00 AM by rschissler.)
I would just use latex caulk or construction adhesive. It doesn't need to be waterproof, and doesn't require anything stronger.
