Vendor of overtravel slides
#15
(01-27-2019, 07:55 PM)MstrCarpenter Wrote: They're 20" closed. You'll lose 2-3/8" of drawer height or 10" of width.

Each one is 5 inches wide?
Reply
#16
(01-27-2019, 11:54 PM)Steve Soldo Wrote: Each one is 5 inches wide?

Looks to be 3-3/4"
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#17
In case it's not solved yet, you could simply mount a shorter drawer on the Blum diagonal corner slides. They are very long and quite robust, but prepare for sticker shock... they aren't cheap.

I bought 3 sets for the kitchen I did in California and they were quite nice. Those drawers were quite large as they were essentially the depth of the corner cabinet (these are used in place of a lazy susan) and were full extension. However, they were like $100/set or perhaps a bit more. https://www.wwhardware.com/blum-tandem-s...b568corner

Normal blum mounting sizes though (about 5/8" wide, undermount clips for back of cabinet, etc...)

Not certain if these would fit the bill or not, but it's one option. Otherwise, I'd be inclined to look into those heavy duty filing cabinet slides, double mount them with a filler strip between (mount one set of slides to the other, to the drawer.) They are robust enough to support the weight of an average drawer full of stuff, but this isn't going to be cheap either as you'll need the good ones rated for a lot of weight due to the distance - I'd probably go for the 150+ lbs versions. https://www.wwhardware.com/kv-8505-overt...s-kv8505-p

Michael
Every day find time to appreciate life. It is far too short and 'things' happen. RIP Willem
Reply
#18
(01-28-2019, 12:19 PM)MichaelS Wrote: In case it's not solved yet, you could simply mount a shorter drawer on the Blum diagonal corner slides. They are very long and quite robust, but prepare for sticker shock... they aren't cheap.

I bought 3 sets for the kitchen I did in California and they were quite nice. Those drawers were quite large as they were essentially the depth of the corner cabinet (these are used in place of a lazy susan) and were full extension. However, they were like $100/set or perhaps a bit more. https://www.wwhardware.com/blum-tandem-s...b568corner

Normal blum mounting sizes though (about 5/8" wide, undermount clips for back of cabinet, etc...)  

Not certain if these would fit the bill or not, but it's one option. Otherwise, I'd be inclined to look into those heavy duty filing cabinet slides, double mount them with a filler strip between (mount one set of slides to the other, to the drawer.) They are robust enough to support the weight of an average drawer full of stuff, but this isn't going to be cheap either as you'll need the good ones rated for a lot of weight due to the distance - I'd probably go for the 150+ lbs versions. https://www.wwhardware.com/kv-8505-overt...s-kv8505-p

Michael

The irony here is that I do not need slides to support a lot of weight.  The client wants a small drawer for utensils opposite where most of the drawers/ storage are located.  This is a counter where people sit down to eat.

I did manage to find a vendor that sells the Chambrelin telescopic slides but they are $250 a pair which is ridiculous.   I had budgeted about $125.  I will probably do what you suggest here, get ordinary full extension slides, put a filler strip between them, and double them up.    

Thanks for the info!!!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.