My kitchen remodel
#48
  Re: My kitchen remodel by Duane N (I bought my home in ...)
Progress on the kitchen remodel as of this morning.  I have two corner/end cabinets leading into the other half of my home through a 30" door opening to figure out then I can finish the flooring.

   

   
Reply
#49
  Re: RE: My kitchen remodel by Duane N (Progress on the kitc...)
(Yesterday, 06:04 AM)Duane N Wrote: Progress on the kitchen remodel as of this morning.  I have two corner/end cabinets leading into the other half of my home through a 30" door opening to figure out then I can finish the flooring.

Looking great so far.  I did more drawer as well a couple deep ones too

One of the best thing I did was add a bread drawer. Bread stay fresh so much longer and stays off the countertop.
Reply
#50
  Re: My kitchen remodel by Duane N (I bought my home in ...)
Lookin good.
Those cabs by the door, you could do a short 45 on the door opening side, giving you better door access.
Maybe a 2-3" in length of a 45 degree angle. You would loose a little cab space in each one, but better walking space.
Steve


Putzing, the new hobby

Evil lurks here, but eventually gets cleansed.


Reply
#51
  Re: My kitchen remodel by Duane N (I bought my home in ...)
Yes to that 45°. I’d be black and blue squeezing through there. If I were redoing my kitchen, EVERYTHING below the counters would be drawers. I don’t see a downside. (Drawers inside doors don’t count. I’ve never understood that insanity.)
Carolyn

Trip Blog for Twelve Countries:   [url=http://www.woodworkingtraveler.wordpress.com[/url]

"It's good to know, but it's better to understand."  Auze Jackson
Reply
#52
  Re: My kitchen remodel by Duane N (I bought my home in ...)
Again...thanks for the feedback.  I was planning on doing a 45 degree cut on the corner cabinets.  I guess what I should have said was I need to figure out how deep to make the angle to insure adequate room between the cabinets but yet keep as much cabinet as possible.  My rough figuring was at 38" between each cabinet at the angle but I'll figure that out tonight.  Smile
Reply
#53
  Re: RE: My kitchen remodel by Duane N (Again...thanks for t...)
(9 hours ago)Duane N Wrote: Again...thanks for the feedback.  I was planning on doing a 45 degree cut on the corner cabinets.  I guess what I should have said was I need to figure out how deep to make the angle to insure adequate room between the cabinets but yet keep as much cabinet as possible.  My rough figuring was at 38" between each cabinet at the angle but I'll figure that out tonight.  Smile

The minimum width for a single wheelchair is 32 inches for up to 24 inches in length, and 36" continuously.

So I'd probably mock up 32" and 36" and see how that looks, as a decent starting place.

And I'm not saying you have to confirm to design for wheelchair access, but the #'s provide a good starting point for a result that likely won't look awkward.
Reply
#54
  Re: My kitchen remodel by Duane N (I bought my home in ...)
Make you a hidy hole there somewhere. Some place to stash cash or that elusive $5000.00 #1 stanley plane ......
Maybe a short (2" tall) drawer in one of those lower end cabs. Have the toe kick cover be a drawer front.
Just make some wood slides, dresser drawer style, nothing fancy.
Steve


Putzing, the new hobby

Evil lurks here, but eventually gets cleansed.


Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)