WTB - Stanley 45 Cutters
#11
Must be able to sharpen (no pitting, etc).

Thanks!
Reply
#12
I bought some cutters for my 45 direct from Stanley. They didn't have many left but there's another possible source. Also, Lee Valley has cutters that will work in a 45 but I think they are a little shorter.

carl
Reply
#13
(02-08-2019, 09:09 AM)Carl Grover Wrote: I bought some cutters for my 45 direct from Stanley. They didn't have many left but there's another possible source. Also, Lee Valley has cutters that will work in a 45 but I think they are a little shorter.

carl

Yes, the Lee Valley cutters will work in the 45 and 55.
George

if it ain't broke, you're not tryin'
Quando omni flunkus, moritati.
Red Green

Reply
#14
I've got 2 standard sets, plus some spares. I'll look over what I have tomorrow.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#15
(02-13-2019, 11:45 PM)Stwood_ Wrote: I've got 2 standard sets, plus some spares. I'll look over what I have tomorrow.

Thanks!
Reply
#16
David. I went through my spares and only have 4.
Three beaders and one straight.
And these do not have the typical stanley notch on topside of the cutter.


Thought I had more
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#17
(02-14-2019, 05:45 PM)Stwood_ Wrote: David. I went through my spares and only have 4.
Three beaders and one straight.
And these do not have the typical stanley notch on topside of the cutter.


Thought I had more

Thanks for looking. I need the notches as I wish to use them with my Veritas combination plane.
Reply
#18
Dave,

I’m pretty sure I have an extra set I can part with. IIRC, its the standard set of 21-22 cutters? Somewhere around there. I’ll dig them out tomorrow.


Reply
#19
(02-07-2019, 10:56 AM)David Katz Wrote: Must be able to sharpen (no pitting, etc).

Thanks!

David... Is this what you're looking for???

   
fred@kingstonco.com
Reply
#20
(02-21-2019, 04:32 PM)Fred Kingston Wrote: David... Is this what you're looking for???

It is. Please IM me with the details, price, etc. 

Thanks!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.