folley belsaw planer
#5
Has any one ever replace the feed rollers on a folley belsaw planer I have the 9103, if so what are the steps
thanks
Reply
#6
Been a long time, don't remember the steps but it was fairly easy.
Put some new springs in there while yer at it.

Those like to accumulate gunk and wood chips under the roller attachment area (brass block). Need to keep that area cleaned out, or you'll loose some feed roller pressure.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#7
Some of the gears may need to come off. Before you remove anything take pictures of the planet together and as you take each piece off. This way you have a reference when you put it back together.

I tore mine down and replaced the cutterhead bearings, painted it and cleaned it. Its loud but works great.
Don
Reply
#8
Try these threads.

http://www.owwm.org/viewtopic.php?f=1&t=143202


http://www.owwm.org/viewtopic.php?f=1&t=...w&start=15
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.