Snappy Bits
#9
Typically, I've always used Fuller countersinks. I need some new ones and was looking at the Snappy bits. I've always been able to sharpen my Fuller bits when dull. Can the Snappy bits be sharpened ? Also, are the hex shanks hollow so to speak ? How "short" can you make the drill bit ?

Thanks for any answers
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply
#10
(03-16-2019, 06:40 PM)museumguy Wrote: Typically, I've always used Fuller countersinks. I need some new ones and was looking at the Snappy bits. I've always been able to sharpen my Fuller bits when dull. Can the Snappy bits be sharpened ? Also, are the hex shanks hollow so to speak ? How "short" can you make the drill bit ?

Thanks for any answers

Are you talking about sharpening the drill bit itself or the countersink?
The hex shanks with the countersink are hollow, so you can make the drill bit short.

Matt
Reply
#11
(03-17-2019, 10:06 AM)mdhills Wrote: Are you talking about sharpening the drill bit itself or the countersink?
The hex shanks with the countersink are hollow, so you can make the drill bit short.

Matt

Sorry, didn't make the question clear. I'm curious about sharpening the countersink itself, not the drill bit. From the pictures I've seen, I can't tell.

Hex shanks are hollow, gotcha, that question is answered, thank you,
Yes
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply
#12
(03-16-2019, 06:40 PM)museumguy Wrote: Typically, I've always used Fuller countersinks. I need some new ones and was looking at the Snappy bits. I've always been able to sharpen my Fuller bits when dull. Can the Snappy bits be sharpened ? Also, are the hex shanks hollow so to speak ? How "short" can you make the drill bit ?

Thanks for any answers

,,,,,,,,,,,,,,,,
Yes...sharpen them just like you would sharpen the drill bits..You can do it on the bench grinder if they have two cutting edges or with a small stone in a Dremel if there are more than two..Just provide sufficient clearance.
Often Tested.    Always Faithful.      Brothers Forever

Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Upset





Reply
#13
(03-17-2019, 09:27 PM)Timberwolf Wrote: ,,,,,,,,,,,,,,,,
Yes...sharpen them just like you would sharpen the drill bits..You can do it on the bench grinder if they have two cutting edges or with a small stone in a Dremel if there are more than two..Just provide sufficient clearance.

Thanks, that's another question answered. I appreciate it.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply
#14
The last snappy products I bought had lost a lot of quality, so I went back to Fuller, and also picked up some Bosch couplers.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#15
The last snappy bits I bought were horrible they lived up to there name snappy
Chinese quality I am with stwood
Also back to Fuller
Reply
#16
(03-18-2019, 10:50 AM)Stwood_ Wrote: The last snappy products I bought had lost a lot of quality, so I went back to Fuller, and also picked up some Bosch couplers.

(03-18-2019, 03:39 PM)oakey Wrote: The last snappy bits I bought were horrible they lived up to there name snappy
Chinese quality I am with stwood
Also back to Fuller

Wow, glad I asked. Fuller have been my go to for 35 years. I actually have a set I need to put on S&S. Over the years, I only need a couple sizes, not a set.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.