Posts: 2,762
Threads: 0
Joined: Dec 2005
Just an update: current progress on display cabinet: sliding dovetails were a SUCCESS!
A bit of an over-cut on one, but overall, not bad looking for a dry fit
Stay tuned!
Posts: 80
Threads: 0
Joined: Feb 2008
Location: N.E,Illionis for now
(03-29-2019, 12:59 PM)Philip1231 Wrote: Just an update: current progress on display cabinet: sliding dovetails were a SUCCESS!
A bit of an over-cut on one, but overall, not bad looking for a dry fit
Stay tuned!
the joints look good, is there going to be a face frame or are the joints going to be exposed?
Posts: 2,762
Threads: 0
Joined: Dec 2005
The dovetails for the shelves will be visible on the front of the cabinet, behind a set of doors. No face frame: full overlay doors.
(03-29-2019, 05:49 PM)jerry s Wrote: the joints look good, is there going to be a face frame or are the joints going to be exposed?
Posts: 4,695
Threads: 0
Joined: Jan 2007
I just cleaned both my eyeglasses and my computer screen, expanded out the photo to the max but for some reason I just can’t see the sliding dovetail joint.
Any free advice given is worth double price paid.
Posts: 2,342
Threads: 0
Joined: Dec 2006
Location: virginia beach VA
(03-31-2019, 07:21 PM)Woodenfish Wrote: I just cleaned both my eyeglasses and my computer screen, expanded out the photo to the max but for some reason I just can’t see the sliding dovetail joint.
Look at the bottom shelf. The top side of the left end of the shelf is straight, the bottom edge, where it meets the side, is a half dovetail. In practice, the half dovetail, on both ends of the board, locks the case sides together. You can see the cut on the lower side of the right end of the board in the first photo.
