Posts: 187
Threads: 0
Joined: Jun 2001
What grease would you recommend for an older Craftsman angle grinder. I have recently acquired a grinder with #1 Lithium Base Grease recommended. I have not located a product described in this manner. Any suggestion as to the best grease to use for this application?
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
NLGI grades we use are normally from 1 to #6. #1 being soft and #6 being almost solid. Grades 0000 or 00 are near liquid.
The #1 or #2 would also be fine. The NLGI grade should be on the container.
Here's an outstanding grease;
https://www.grainger.com/product/MOBIL-M...reme-2RV29
Posts: 187
Threads: 0
Joined: Jun 2001
(06-29-2019, 05:06 PM)daddo Wrote: NLGI grades we use are normally from 1 to #6. #1 being soft and #6 being almost solid. Grades 0000 or 00 are near liquid.
The #1 or #2 would also be fine. The NLGI grade should be on the container.
Here's an outstanding grease; https://www.grainger.com/product/MOBIL-M...reme-2RV29
Posts: 187
Threads: 0
Joined: Jun 2001
Woops, Was wanting to thank you, Daddo!
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Tube of white lithium, available at most parts stores.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020