More work to do
#14
  Re: More work to do by bandit571 (Rehabs from garage s...)
All polished up....high tech polisher Winkgrin  
   
Then a second coat, rubbed down with a rag.... Winkgrin 
   
other side got the same treatment.... Cool 
   
And a test drive was done..about 10 strokes.. Rolleyes  
   
Saw is about as done as I will do, today...saw set? Confused
   
Right now, the number on the anvil reads "8".. Confused 
   
Millers Falls No. 214....might work on the 7ppi saw teeth? 

Stay tuned Winkgrin
Show me a picture, I'll build a project from that
Reply
#15
  Re: More work to do by bandit571 (Rehabs from garage s...)
We have more work to do...until I find enough lumber for a project to build... Rolleyes so...a few block planes need some work.. Cool
   
5 planes....counting the two from this year's sales...
   
Some parts were cleaned up, threads oiled, others got a new coat of paint...decided to at least get the red one done...
   
Sole is flat as I need it to be.   iron got it's back flattened, bevel sharpened to 25 degrees, honed to 2,000 grit, then stropped...put the plane back together
   
Once I got the iron adjusted for depth and lateral, Winkgrin  and the test track grain going the right way Rolleyes took it for a test drive.. Cool 
   
Plane was sold by Geo. Worthington Co. of Cleveland, OH....marked on the iron as a W2200.   Seems to be a Stanley No. 220. 
As for the rest of the mob..
   
May do one a day?   The bad one is the ..
   
The Great Neck knock-off of a Stanley # 9-1/2...sole will need a LOT of work..
   
Ummmmm.  Will update as I go along....
Stay tuned
Show me a picture, I'll build a project from that
Reply
#16
  Re: More work to do by bandit571 (Rehabs from garage s...)
Will be throwing one of the irons away....paper thin, stamp just says "JAPAN"....even the honing guide makes it bend.....sounds like a little bird."Cheep, cheep..cheap"

I think I might have a spare iron, or three.  Of the next 3 to work on...the 220 look alike MIGHT be a Millers Falls version....since the iron has that triangle logo. 

Stay tuned....will see what is going on, after Lunch..... Winkgrin
Show me a picture, I'll build a project from that
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)