Adding an extra top to my table saw
#13
  Re: Adding an extra top to my table saw by Scott W (Is this a loony idea...)
On one side of my shop I have a Unisaw, with carbide rip blade, and a contractors saw, with carbide dado stack, married together on a mobile base. These 2 saws share a Beismeyer fence. On the other side I have a Unisaw, with carbide combination blade, and a re-purposed cast iron table saw top, with a 3-1/2 hp router beneath. These 2 machines share a Unifence.




Wood is good. 
Reply
#14
  Re: Adding an extra top to my table saw by Scott W (Is this a loony idea...)
My two saws work pretty well together. No reason to think yours won't as long as they're properly supported...


"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)