Mallets
#3
  
Just an FYI.
     I am finishing up a small batch of resin infused mallets. 
The approx. 2.375 x 2.25" x 5" hard maple heads are cut to weigh approx. 16.5 -17 ounces before drilling the tenon hole. Overall length of the mallet is approx. 9 inches. Overall weight of the mallet varies depending on handle wood. Currently the handles will be made of Hickory, Bubinga, Mahogany,infused curly maple, and zebra wood. They are reinforced with a steel rod all the way through and a cap nut on each end to prevent the mallet from coming apart should the epoxied tenon ever fail. These are not on my web site yet. Interested? Drop me an email.

Sample pic.: The Ebony handle is mine.
https://flic.kr/p/2h5bCsu
https://flic.kr/p/2h5bCsu
Cost will be $50.00 to $75.00
BontzSawWorks.net
Reply
#4
  Re: Mallets by RonB1957 (Just an FYI.      I ...)
(08-25-2019, 11:23 AM)RonB1957 Wrote: Just an FYI.
 

Sample pic.: The Ebony handle is mine.
https://flic.kr/p/2h5bCsu
https://flic.kr/p/2h5bCsu
Cost will be $50.00 to $75.00

Very nice tools.

PS - I'll take the Ebony handled one!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)