Making croquet mallets
#17
(09-13-2019, 06:12 PM)goaliedad Wrote: Simple hole drilled thru the head and a wood wedge to hold the handle in place?

This morning over coffee I was thinking this would be the best solution.  I've become suspicious of the reviews complaining about breaking the mallet handles.  When I assembled it I noticed that a hand tighten brings the grain perpendicular to the head and that's asking for trouble like hitting a baseball with a wooden bat, seal forward.  I made certain to tighten the handles so the grain was parallel to the mallet head.

First thing my grandson did was take a mallet and ball and give it a good whack across the living room.  At nine years old I'd of done the same thing.
Reply
#18
(09-13-2019, 11:02 PM)Phil S. Wrote: Beall also makes a threader you use with a router -

http://www.bealltool.com/products/thread...reader.php


Thats the co I was trying to think of.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#19
Croquet Mallets don't have to be round. Someone showed up with a mallet like this at an annual camp out I attend and it was amazing.

https://www.amazon.com/Wood-Mallets-Orig...7533&psc=1

Make it out of some hard wood like Ipe and you will be the envy of the court that only has the 'ccr@ppy' mallets usually found in sets.

Pedro
I miss nested quotes..........
Reply
#20
(09-16-2019, 09:37 AM)PedroOhare Wrote: Croquet Mallets don't have to be round. Someone showed up with a mallet like this at an annual camp out I attend and it was amazing.

https://www.amazon.com/Wood-Mallets-Orig...7533&psc=1

Make it out of some hard wood like Ipe and you will be the envy of the court that only has the 'ccr@ppy' mallets usually found in sets.

Pedro

I strive for perfection, yet excellence is tolerated. I also take pride in my work. So do you want to buy a set of 6? I can do a little better on a ten piece set; how about $2500.00?
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
Reply
#21
(09-16-2019, 09:37 AM)PedroOhare Wrote: https://www.amazon.com/Wood-Mallets-Orig...7533&psc=1


Eek
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#22
(09-16-2019, 09:37 AM)PedroOhare Wrote: Croquet Mallets don't have to be round. Someone showed up with a mallet like this at an annual camp out I attend and it was amazing.

https://www.amazon.com/Wood-Mallets-Orig...7533&psc=1

Make it out of some hard wood like Ipe and you will be the envy of the court that only has the 'ccr@ppy' mallets usually found in sets.

Pedro

The picture on the directions showed a square head mallet.  I see a mallet like linked for $350 and am reminded of an old thread about some wooden blocks designed to elevate audio wires and cables off the ground and thereby increase fidelity through something or other.  They were 2" squares of 4/4 with a notch in them, made of birch and only $60 ea.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.