Izzy Swan Arc Bandsaw Jig / CCC Jig Peach Tree
#6
Any one have any experience with anyone of these jigs? And if so, what are your thoughts and experiences with them and or do you like them? Please give a review ….


https://youtu.be/tdZOirHdDjM

https://youtu.be/NjSH8rCswV0
Reply
#7
I have just made the jig from his templates. It does work, but mine needs a little tweaking. I think I need to sand the radius a little better, and I know wax will be a great benefit.

Oz
S.E. Alabama, formerly from Wisconsin.
Reply
#8
(09-27-2019, 09:58 PM)Wizard of Oz Wrote: I have just made the jig from his templates.  It does work, but mine needs a little tweaking.  I think I need to sand the radius a little better, and I know wax will be a great benefit.

Oz

Oz, thanks for the info, have you ever tryed cutting smaller radius on the jig for like box legs for like asian style jewelry boxs ?
Reply
#9
I haven't had much time to play with it, but small radius might be possible with the correct guide. I have a 1/2 inch blade in the saw now ( too wide for small curves ), but with a small blade like maybe a 1/4 inch it might work.

Oz
S.E. Alabama, formerly from Wisconsin.
Reply
#10
(10-01-2019, 09:58 AM)Wizard of Oz Wrote: I haven't had much time to play with it, but small radius might be possible with the correct guide. I have a 1/2 inch blade in the saw now ( too wide for small curves ), but with a small blade like maybe a 1/4 inch it might work.

Oz

That's what I thought on smaller things like legs as well.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.