Posts: 4,164
Threads: 0
Joined: Feb 2001
I also have an Excalibur sliding table for a table saw. The one that if the fence is in the back you can cross sut 48 inches. I didn't take pictures because it is an after thought but only asking $300 and not $1000. again pick up only. But I was asked so here they are.
[attachment=21720]
[attachment=21721]
Thanks for looking
Tom
Posts: 5,340
Threads: 0
Joined: Nov 2002
Location: Racine, Wisconsin
(11-12-2019, 07:47 PM)tablesawtom Wrote: I also have an Excalibur sliding table for a table saw. The one that if the fence is in the back you can cross sut 48 inches. I didn't take pictures because it is an after thought but only asking $300 and not $1000. again pick up only. But I was asked so here they are.
Thanks for looking
Tom
Where are you located Tom?
Thanks!
John
Formerly known as John's Woodshop
Posts: 3,243
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
(11-13-2019, 08:14 AM)Belle City Woodworking Wrote: Where are you located Tom?
Thanks!
John
Saw in one of his other posts he's in north central Iowa....if he were closer this would be home with me already
Posts: 9,913
Threads: 1
Joined: Apr 2005
Location: Texas
Is this the one that is no longer being made?
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
AD1 T. O. Cronkhite
