Clock Parts help
#8
Hi All,
I'm building a Regulator Clock and for some reason cant find a 11" to 12" +/- dial with Roman numerals. I built a schoolhouse clock some years back and purchased my parts at Klockit or Clockworks. They sell larger and smaller dials, but not the size I'm looking for? Does anyone know of a place online that I can find this size dial? I would very much apricate the help!
Thanks,
Charlie
Reply
#9
https://www.clockparts.com/11-1-8-clock-dial/

https://timesavers.com/c-325620-clock-re...dials.html

https://perrinwatchparts.com/collections...rts?page=2
Some people are like a Slinky. Not really good for anything but still bring a smile to your face when you push them down a flight of stairs.

A dead enemy is a peaceful enemy. Blessed are the peacemakers.
Reply
#10
(12-13-2019, 06:25 PM)chuckross Wrote: Hi All,
I'm building a Regulator Clock and for some reason cant find a 11" to 12" +/- dial with Roman numerals. I built a schoolhouse clock some years back and purchased my parts at Klockit or Clockworks. They sell larger and smaller dials, but not the size I'm looking for? Does anyone know of a place online that I can find this size dial? I would very much apricate the help!
Thanks,
Charlie

https://timesavers.com/c-325622-clock-re...dials.html
Reply
#11
Here's one more place to look

One of my coworkers is giving 20" diamond saw blades the Bob Ross effect.  He does a nice job I must say. I have one that is in need ... so I will be doing some shopping as well shortly.
Lots of clock parts on E-Bay as well.
Five clocks given as Christmas presents last year. I ended up finding the dials on E-Bay.

[Image: 6unLUouD0Lb5hsXWeOdcjwF1AGV_aj871QGwxLsu...79-h944-no]



If it can't kill you it probably ain't no good. Better living through chemicals.

 
Reply
#12
Thank You all for all the good tips!!! 


After looking a little more at your sites, I think I'm going to find exactly what I'm looking for... Thanks Again!!
Charlie
Reply
#13
If you want a great dial, have one made. https://www.dialhouse.net/
Reply
#14
Lately, I’ve been making my clock dials out of wood using a CNC.
VH07V  
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.