bOSCH ROUTER ADApter
#6
  
I have the Whiteside inlay kit and a Bosch 1617 plunge router.  The router plate opening is too big for the inlay kit.  Does anyone know what adapter I need to make them comparable"?  Bosch on line not much help.  Thanks.
Reply
#7
  Re: bOSCH ROUTER ADApter by weelis (I have the Whiteside...)
this, I think.

https://www.amazon.com/Bosch-RA1129-Temp...B06WGT9MGT

Reality is that which, when you stop believing in it, doesn't go away. - Philip K. Dick

Mark

Reply
#8
  Re: bOSCH ROUTER ADApter by weelis (I have the Whiteside...)
In addition to the RA1129 that meackerman referenced you may also need this RA1100 which accepts Porter Cable style guide bushings.

https://www.amazon.com/Bosch-RA1100-Thre...WA9ZB195AY

Bill
Reply
#9
  Re: bOSCH ROUTER ADApter by weelis (I have the Whiteside...)
I use the RA1129 to hold the RA1129 and then use the Porter Cable guide bushings. I tried a set of Rockler Brass bushings but found them to be sloppy and enough out of round that they did not work well in a Leigh Dovetail jig. No issues with the Porter Cable bushings.

Dave
MKM - Master Kindling Maker
Reply
#10
  Re: RE: bOSCH ROUTER ADApter by wjt (In addition to the R...)
(12-26-2019, 03:17 PM)wjt Wrote: In addition to the RA1129 that meackerman referenced you may also need this RA1100 which accepts Porter Cable style guide bushings.

https://www.amazon.com/Bosch-RA1100-Thre...WA9ZB195AY

Bill, et al  the RA1100  is included with RA1129 .

You may notice it says "set", and is shown in the picture.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.