WTB- LH Arbor Nut for Unisaw
#6
Anybody got 1 (or 2) they want to get rid of? You can still find them, but they're $25 a pop. Would also accept lead on a suitable replacement on-line, looked around a little and figured I would just start here. 

I still have one, but it took 2 hours digging thru the sawdust pile and pulling the hood on the saw to recover it. I figure it's time to buy a spare before they're all gone. 

Thanks!
Reply
#7
(07-06-2020, 03:06 PM)ajkoontz Wrote: Anybody got 1 (or 2) they want to get rid of? You can still find them, but they're $25 a pop. Would also accept lead on a suitable replacement on-line, looked around a little and figured I would just start here. 

I still have one, but it took 2 hours digging thru the sawdust pile and pulling the hood on the saw to recover it. I figure it's time to buy a spare before they're all gone. 

Thanks!

Saw some on eBay for sub $13 shipped

https://www.ebay.com/i/303609205264?chn=...BbEALw_wcB
"I cut it twice and it's still too short!"
Reply
#8
(07-08-2020, 09:03 AM)ryanlipski Wrote: Saw some on eBay for sub $13 shipped

https://www.ebay.com/i/303609205264?chn=...BbEALw_wcB

Thanks- that's what I did so no longer in the market for arbor nuts.
Reply
#9
(07-06-2020, 03:06 PM)ajkoontz Wrote: Anybody got 1 (or 2) they want to get rid of? You can still find them, but they're $25 a pop. Would also accept lead on a suitable replacement on-line, looked around a little and figured I would just start here. 

I still have one, but it took 2 hours digging thru the sawdust pile and pulling the hood on the saw to recover it. I figure it's time to buy a spare before they're all gone. 

Thanks!

If they are 5/8ths I got mine from Ebay $5

https://www.ebay.com/itm/5-8-18-Left-Han...SwmvpcMQ00


Or 2 for $7

https://www.ebay.com/itm/LH-5-8-18-Threa...SwSlBYr5-J
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#10
(07-06-2020, 03:06 PM)ajkoontz Wrote: Anybody got 1 (or 2) they want to get rid of? You can still find them, but they're $25 a pop. Would also accept lead on a suitable replacement on-line, looked around a little and figured I would just start here. 

I still have one, but it took 2 hours digging thru the sawdust pile and pulling the hood on the saw to recover it. I figure it's time to buy a spare before they're all gone. 

Thanks!

Last time I did that I fastened a pretty strong magnet to a dowel...saves a lot of reaching around/time...
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.