Posts: 1,030
Threads: 3
Joined: Jun 2011
Location: N. Cincy inside the loop
I am making a jewelry box out of a recycled cedar (?) cigar box. I would like to affix a craft mirror to the inside of the lid. Lid is thin and shallow so no room for screws or a frame.
Has anyone glued in mirrors like this? What adhesive worked best? Contact cement? Double sided turning tape? JB Weld? Epoxy? Other?
Posts: 2,377
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
Several years ago I mounted mirrors on the inside of some 8" farm implement "wheels" using silicone caulking. No problems so far.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 1,030
Threads: 3
Joined: Jun 2011
Location: N. Cincy inside the loop
(09-16-2020, 04:26 PM)Bill Holt Wrote: Several years ago I mounted mirrors on the inside of some 8" farm implement "wheels" using silicone caulking. No problems so far.
Thanks, Bill. Never thought of silicone caulk.
-aj
Posts: 270
Threads: 0
Joined: Jan 2007
Location: Warrenton, MO
Be careful on which silicone caulk you get. Some are not suitable for mirror backs. There is adhesive made for mirror backs. Fairly easy to find. Like right here
Liquid Nails LN-930 Mirror Adhesive
Was living the good retired life on the Lake. Now just living retired.