Festool hose, book, DVD, and several hand tools

[msweig]

Several things here for sale.  First to PM me  saying "I'll take it" gets it.  Costs for most stuff is listed, along with weight and you can determine USPS shipping costs from 77007.  If you purchase multiple things I'll combine and get back to you on shipping cost.  The one oddball thing is most of the saws.  I didn't bother to weigh them, as these typically are a bit more to ship due to shape, and who knows how many you would want (I'd prefer not to prebox to get an idea of shipping weight if I can avoid it).   And I could be off on cost of some things, so feel free to correct me if I'm crazy.


Paypal preferred, but will take check though there will be a delay in shipping till it clears.

First up is a Festool 27mm x 3.5m hose.  This is the older ribbed hose that used to come with the vacs.  I upgraded to the newer style and don't need this hose.  Excellent shape.  $75 + 2.5 lbs shipping from 77007 SOLD

   

Next is the Making a Dutch Tool Chest DVD from Chris Schwarz.  $22 + <1 lb shipping from 77007

   

The Great All-American Wooden Toy Book.  $3 + 1.5 lbs shipping from 77007 SOLD

   

Derek Cohen made Hot Dog Handle for the Lee Valley Low Angle Jack Plate.  $45 + <1 lb shipping from 77007. SOLD

   

   

Lee Valley Marking Gauge and Mortise attachment.  Bit of surface rust on the mortise attachment parts, but should be easy to clean.  Also some tarnish, but works fine.  $30 + <1 lb shipping from 77007 SOLD

   

   

1/2 inch Stanley 720 chisel.  $25 + <1 lb shipping from 77007 SOLD

   

   

Next post will be several saws.

[msweig]

Old coping saw.  $10 + <1 lb shipping from 77007 SOLD

   

   
 
Everything below this point I’d like to know what is wanted before trying to figure out shipping.
 
EC Atkins No 65 Ship Point.  26”, 7ppi x-cut.  Handle and blade are both in good shape.  Etch is totally visible.  The 7ppi xcut note by the handle was written with a sharpie and will easily clean off with a bit of DNA.  Could use a touch-up on sharpening.  Slight curve on the blade, but should be easily fixable/not a problem in use.  $60 + shipping

   
More photos: https://photos.app.goo.gl/tRKhfFZA9LsE8Hg1A
 
Disston 16” backsaw.  12ppi x-cut (needs sharpened).  Chip out of the top horn, and the blade is a bit wavy (I haven’t tried fixing it).  The blue tape on the handle I had a note on and it has been removed.  If that is a split on the bottom part of the handle it is tight, so I’ve assume it was repaired at some point.  $40 + shipping

   
More photos: https://photos.app.goo.gl/D57bsQEC4b16rBH56
 
Warranted Superior 24” panel saw.  10ppi rip.  Needs sharpened.  Bit out of the top horn.  Straight as an arrow.  $15 + shipping

   
More photos: https://photos.app.goo.gl/wMqgGdsmr4uR1SYh6
 
14” Disston Backsaw.  Obviously more modern.  13ppi xcut.  Could use a touchup on sharpening, and you could always modify or make a new handle to make it more comfortable.  $10 + shipping SOLD

     
https://photos.app.goo.gl/fx82q7cFrJqJPHHXA
 
Now we get to the serious project saws.  These are going to be more for people who want a project/practice sharpening more challenging situations, etc.  I’m not sure I would recommend them, but maybe someone would like them. 
 
Warranted Superior 22 inch panel saw.  The etch says “Tip Top” but it is not in tip top shape.  The teeth are decently spaced on this one, but some have snapped off, so they might need filed down and started over.  $1 plus shipping SOLD

     
https://photos.app.goo.gl/gEENPCNYirs8CF589
 
14” Frankensaw with the worst toothline I’ve ever seen.  Seriously, I think my first time sharpening a saw I did better than this.  Maybe the user had a few (dozen) drinks before sharpening.  $1 + shipping SOLD

     
I mean seriously.  Look at this
:

   
https://photos.app.goo.gl/D3kQkCoS1MxaEkF78

 
14” Diamond Edge backsaw.  Missing a saw nut.  And teeth.  Not a particularly comfortable handle.  But at least you don’t have to file the teeth off if you want to take a shot at making them yourself.  $1 + shipping. SOLD

     
https://photos.app.goo.gl/m2d3kqk1zCLFEgfu7

[Wipedout]

I might be interested in the hose need to check to see it it will work with my Festool vac

[msweig]

Should be good with the CT 26/36/48. For the other models I have no idea.

[msweig]

Marking gauge, chisel, and three $1 practice saws are sold pending payment.

Mark

[Scott W]

Your sales pitch on those last saws was amazingly effective. 

[msweig]

Nice observation Scott


Toy book, coping saw, and modern Disston backsaw sold pending payment.

[msweig]

Bump and some price drops:

Festool Hose: $70 + shipping SOLD

Dutch Tool Chest DVD (This is longer than most instructional videos (2 hours) and goes over various things in good detail (dovetail, dados, nails, installing hardware).  Even if you don't want to build a dutch tool chest this can teach a beginner a lot): $17 + shipping

Hot Dog Handle: $35 + shipping SOLD

Shiny EC Atkins #65: $50 + shipping

Disston 16" backsaw (longer than typically found): $35+ shipping

Warranted Superior 24" panel: $10 + shipping

[msweig]

Hot dog handle sold

[Wipedout]

Hot dog handle sold

Do you know the model number of the hose? - I have a CT22E   I'll take it if it fits - I just need to figure that out - I just realized you are the guy I bought that 8" grinder from back in Jan 2019