11-26-2020, 02:54 PM
(This post was last modified: 11-30-2020, 12:59 PM by Philip1231.)
Picked up a Rob Cosman Large Tenon Saw recently, in unused condition (so many high end tools found in the wild seem to end up unused). This saw is set up with progressive pitch and my handful of test cuts indicates that it is sharp and tracks well, and is very easy to start with the 20 tpi at the toe. Only apology is a few very small dots of corrosion on the back side from storage: one is at the tooth line and one is up near handle connection. These are cosmetic and have no impact on sawing performance. No longer available.