Bandsaw blade tooth set?
#5
I screwed up a blade
Upset
Upset
Upset
Upset. Can a person use one of those hand tooth set tools that sorta looks like a pliers to reset them or do you have to have an expensive machine?
Jim

There is a good chance
Broccoli doesn’t like you either.
Reply
#6
You can use a hand setter, providing the distance between the teeth lets the setter shaft hit each tooth.
Find your band specs and use the original tooth set, which will be in thousands.
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#7
Thanks Steve.  It's a 3/4 inch 3TPI Timberwolf new out of the box.  It resawed the first two pieces of wood like a hot knife through warm butter.  Started burning on the third piece of 6 inch long white oak. I'll look up the specs.
Jim

There is a good chance
Broccoli doesn’t like you either.
Reply
#8
Ok. Watch the teeth. It may have a left-right-left-right pattern.
Or a left-straight-right-left-straight-right
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.