Blum hinge help please
#4
  
Need some help figuring out a hinge mounting plate. The Blum excel program isn't working well on my computer.

Using a 71T9780 hinge, it's a 95 degree thick inset door hinge, press in type.

Need a screw on mtg plate that will give me a 2mm reveal.

Thanks

Ed
Reply
#5
  Re: Blum hinge help please by EdL (Need some help figur...)
(12-28-2020, 12:36 PM)EdL Wrote: Need some help figuring out a hinge mounting plate. The Blum excel program isn't working well on my computer.

Using a 71T9780 hinge, it's a 95 degree thick inset door hinge, press in type.

Need a screw on mtg plate that will give me a 2mm reveal.

Thanks

Ed

You need a 0 mm mounting plate.  The bore distance is 5 mm for a 2 mm reveal.  For frameless cabinets, mounting plate B175H710 or 910 or B173H710 all will work.  

John
Reply
#6
  Re: Blum hinge help please by EdL (Need some help figur...)
excellent, thanks John.

Ed
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.