1/8 band saw blades
#4
Does anyone make a 1/8 in. blade with less then 14 teeth or a skip tooth one?
Reply
#5
(01-09-2021, 10:19 AM)bgosh Wrote: Does anyone make a 1/8 in. blade with less then 14 teeth or a skip tooth one?

Have you tried Carter? Ignore the form and call them. I had a 40's bandsaw and had to order all of my blades specially made, they never failed me. Now, I've not needed <14 on a 1/8, but I have had some pretty (to me) odd requests.
Mike

I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
Reply
#6
What is your intended use? If it is fairly intricate curves in thicker wood take a lesson form the bandsaw box builders and try a 3/16 10 tooth blade out. It is my favorite blade for everything but long straight cuts.
Proud maker of large quantities of sawdust......oh, and the occasional project!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.