Finishing my sharpening station

[tablesawtom]

The tool rollaway was built last summer. Setting up the grinder station has been the winter project. The grinder with the wire wheels and the Tormek just store on the cart. It is to high to actually use the tormek on. Anyway now all sharpening jigs and fixtures are stored in one place and I am already loving one central place for every thing. It is not finished I need to mount the slow speed grinder onto a separate board so I can take it to my shop for in the summer. Also I need to put the supports that hold the tormek bars farther out so I can change wheels. Right now I can't remove the CBN wheels

   

   

Thanks for looking,

Tom